Optional Accessories Features Applications Display Key Pad OPERATION Power Operation Measurements Data Hold Backlight STEL, TWA, MIN and MAX Alarm Auto Power Off Set-up Alarm Temperature Scale CALIBRATION Procedure Specifications Temperature Humidity PC Connection Warranty Return Policy Copyright 2011 VTI-Valtronics Inc.
Description The Valtronics Model 2011 is a portable Carbon dioxide (CO Monitor designed for use in indoor air quality (IAQ) monitoring. In addition to the unit also measures air temperature, dew point, wet bulb temperature and humidity. Monitor uses non-dispersive infrared (NDIR) technology to insure outstanding reliability and long term stability.
Backlight on display Easy manual calibration for and humidity PC connector via RS232 interface Applications • Indoor air quality • Wineries and breweries • Greenhouses • Food processing • Detection of for NFPA 12 regulations • storage facilities Copyright 2011 VTI-Valtronics Inc.
Time weighted average (8 hours) STEL Short-term exposure limit (15 minutes weighted average) HOLD Readings are frozen unchanged MIN/MAX Minimum/maximum readings Low battery indicator Dew point temperature Air temperature Wet bulb temperature Unit of relative humidity ° (C/F) Celsius/Fahrenheit Copyright 2011 VTI-Valtronics Inc.
MODE▲ Selects unit or decreases value in set-up Enters RH calibration with DP/WBT ▼ —— Activates MIN, MAX, STEL & TWA functions Freezes the current readings ————— Saves and finishes settings Cancels data hold function Copyright 2011 VTI-Valtronics Inc.
It emits an 80 Db warning beep whenever the limit is exceeded. Pressing any button except SET will stop the alarm, and it will stop on its own when the concentration returns below the set point. Copyright 2011 VTI-Valtronics Inc.
Enter the Set-Up mode, press the Mode button and then the M/AV button. You should see “Unit” in the display window and “°C” should be flashing. Press the MODE button to change between “°C” and “°F”. Press the M/AV button to save the setting (note: to return to Normal operation press CAL/Esc). Copyright 2011 VTI-Valtronics Inc.
The meter may be calibrated with either fresh air or with the optional Calibration Kit available from Valtronics. In most cases, by carefully selecting your calibration site and time, the fresh air will be sufficient. The calibration site should be selected to be outdoors with fresh air.
PC Connection The meter can be linked to your PC with our RS-232 interface and software. The Protocol is 9600 baud 8 bits and no parity. Complete protocol information will be provided with the optional kit. Copyright 2011 VTI-Valtronics Inc.
RETURN POLICY Valtronics will honor warranty repairs within one year of purchase, and will make every attempt to repair non-warranty damage, defects, or functional failures after we have provided a return authorization number (RMA).
Page 12
Notes: For ordering information contact Valtronics Sales Department Phone: (209) 754-0707 • FAX (209) 754-0104 • e-mail: vti@val-tronics.com • www.val-tronics.com Copyright 2011 VTI-Valtronics Inc.
Page 13
Notes: For ordering information contact Valtronics Sales Department Phone: (209) 754-0707 • FAX (209) 754-0104 • e-mail: vti@val-tronics.com • www.val-tronics.com Copyright 2011 VTI-Valtronics Inc.