1. Manuals
  2. Brands
  3. 2gig Technologies Manuals
  4. Network Hardware
  5. 2GIG-NVR1
  6. Installation instructions manual

2gig Technologies 2GIG-NVR1 Installation Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
2GIG-NVR1
NETWORK VIDEO RECORDER (NVR)

INSTALLATION INSTRUCTIONS

Contents
Verify that the package includes the following:
• 1—2GIG Network Video Recorder Module (NVR)
• 1—Plug-in Power Adapter (120VAC)
• 1—3"CD
• 1—Paper Moun ng Template Guide
• 1— USB Mouse Controller
• 1— 1 Terabyte Single Hard Disk Drive
• 4—1-1/2" Phillips Screws and anchors
• 4—1/4" Phillips Screws (for moun ng hard drive to NVR cover)
• 1—Removable Terminal Block (to connect alarm input/output)
Figure 1. Network Video Recorder (NVR) Contents
Installa on Tools Required
• Phillips Screw Driver
• Variable Speed Electric Drill
• Level (for wall moun ng of NVR module)
Hard Drive Installation into NVR
1.
Remove the two screws on the bo om of the Network Video Recorder
housing.
Figure 2. Hard Disk Cover Removal
2.
Pry up the hard disk cover to expose wiring harness for harddisk connec on.
3.
Fix the hard disk to the hard disk cover using 4 1/4" Phillips screws (Provided
with NVR).
Figure 3. Fixing Hard Disk to NVR Hard Disk Cover
HARD DRIVE COVER
Figure 4. Placing Hard Disk/NVR cover into NVR case bo om.
4.
Plug wiring harness to the hard drive terminals, then seat hard drive with
cover down into NVR case.
Figure 5. Plugging in Hard Drive
HARD DRIVE
HARD DRIVE
WIRING
HARNESS
PLUG
CONNECTOR

Advertisement

Table of Contents
loading

Summary of Contents for 2gig Technologies 2GIG-NVR1

  • Page 1: Installation Instructions

    2GIG-NVR1 NETWORK VIDEO RECORDER (NVR) Figure 3. Fixing Hard Disk to NVR Hard Disk Cover INSTALLATION INSTRUCTIONS Contents Verify that the package includes the following: • 1—2GIG Network Video Recorder Module (NVR) • 1—Plug-in Power Adapter (120VAC) • 1—3”CD HARD DRIVE COVER •...
  • Page 2 Network Video Recorder | Installation Manual Replace the screws into the bo om of the NVR case cover. Hard drive LETTER ITEM DESCRIPTION installa on is now complete. MIC IN MIC input Figure 6. Closing Hard Drive Case Cover PoE network interface Four (4) network interfaces for IP cameras PoE Class 3 (reserved for future use) DC power interface Connected to an external power adapter...
  • Page 3 Network Video Recorder | Installation Manual Figure 10. NVR Back Panel Alarm Input/Alarm Output Connec ons Figure 14. NVR Back Panel LAN Connec on 5V LOAD ALARM INPUT ETHERNET (CONTACT SWITCH) CABLE ALARM OUTPUT (SIREN) ROUTER Figure 11. NVR Back Panel PoE Camera Connec ons (1 TO 4) IP CAMERA CONNECTIONS (OPTIONAL HOOKUP) Figure 15.

  • Page 4: System Power-Up

    Network Video Recorder | Installation Manual System Power Up A er ini aliza on is complete, the login screen appears as shown in Figure 13. Change the screen resolu on by clicking on the “change” link at the bo om. Also, Once POWER is turned on and all components are func oning correctly, the screen output can be adjusted by clicking the adjust link.

  • Page 5: Live Video

    Network Video Recorder | Installation Manual Figure 21. Date & Time Live Video Figure 19. Live Video Screen Default device name is 2GIG NVR. Click the bu on to the far right of the DEVICE TIME to open date and me window.
  • Page 6 Network Video Recorder | Installation Manual Figure 23. Network Setup Figure 25. Adding Cameras Use the Networks sec on to set up Local Area Networks (LAN1 & LAN2). Figure 26. Adding Cameras (Con nued) To ensure recording of the IP Cameras to the NVR, verify network connec vity. LAN1 should be connected to your exis ng LAN network.
  • Page 7 Network Video Recorder | Installation Manual Figure 27. Camera Confi gura on Figure 29. Record Policy (Con nued) Figure 28. Record Policy Select “Record Audio” to record IP Camera audio. Set the “Storage Policy” to Overwrite the video recording when the disk is full, or save recording of a set number of days.
  • Page 8 Network Video Recorder | Installation Manual Figure 31. Mo on Alarm Figure 33. Video Playback Select Mo on Alarm in the Quick Setup menu to confi gure Mo on Detec on se ngs on the IP Camera. Select Mo on Alarm to enable Mo on Alarm. Select Schedule Se ng to schedule when Mo on Detec on will be ac ve.
  • Page 9 Network Video Recorder | Installation Manual iOS NVR App Quick Start Figure 38. Live View Figure 35 2GIG NVR app icon. From the Apple App Store search for 2GIG NVR app. The func on bar allows you change layouts, zoom in/out, enable audio, and Install and launch the 2GIG NVR app.
  • Page 10 Network Video Recorder | Installation Manual Figure 40 Playback Calendar Android NVR App Quick Start Figure 42. 2GIG NVR app icon In the playback screen you can select on the Calendar icon to change the From the Google Play Store, search for 2GIG NVR app date.

  • Page 11: Troubleshooting

    Network Video Recorder | Installation Manual Figure 45. Live View TROUBLESHOOTING Q: I cannot see the IP Camera on my network A: Make sure that the IP Camera is powered on. If using PoE for power ensure that the Ethernet cable is connected to the correct PoE port. If using a power supply ensure that the power is plugged into the wall.

  • Page 12: Regulatory Information

    Network Video Recorder | Installation Manual !CAUTION! REGULATORY INFORMATION WARNING: Changes or modifi ca ons not expressly approved by Nortek Security CAUTION & Control could void the user’s authority to operate the equipment. RISK OF ELECTRIC SHOCK This device complies with FCC Part 15 Rules and Industry Canada licence- DO NOT OPEN exempt RSS standard(s).

Table of Contents