Table of Contents
Advertisement
Quick Links
The manual is designed only for the use of the vehicle tire pressure monitoring system
(TPMS), without the written approval of FCAR, any corporation or individual cannot
copy and backup in any form (electronic, mechanical, photocopying, recording or other
means).
This manual is only used for professional automobile maintenance technicians. This
manual offers the product operating methods only. The company accepts no
responsibility for any possible consequence of the use of this manual as applied to other
equipment.
The company will not take any responsibility for the user or third parties for equipment
damages, losses, costs, or expenses resulted in accidents, abuse or misuse of this
product, or unauthorized modifications, repairs or alterations to this product or
operation or maintenance to not comply with the instructions. This manual is based on
the latest configurations and functions of product。 The new description, data and
illustration may change compared to those described in this manual. FCAR reserves the
rights to make changes to its products without prior notice.
FCAR has registered trademark in Mainland China. In the countries and areas where our
trademark, service identification, domain name, icon, company name, etc. have not
been registered, FCAR claims ownership for non-registered trademark, service
identification, domain name, icon and company name. Other products and trademark of
company name referred in this manual still belong to the original registered company.
Without the consent of owner in written form, any individual or third parties cannot use
our trademark or any other referred trademark of other company, service identification,
domain name or company name, etc.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1.This device may not cause harmful interference.
2.This device must accept any interference received, including interference that may
cause undesired operation
FCAR Series Product Operation Manual Instruction
Statement
1
Advertisement
Table of Contents
Summary of Contents for Fcar IDIAGT138
- Page 1 FCAR has registered trademark in Mainland China. In the countries and areas where our trademark, service identification, domain name, icon, company name, etc. have not been registered, FCAR claims ownership for non-registered trademark, service identification, domain name, icon and company name.
- Page 2 FCAR Series Product Operation Manual Instruction Registered trademark FCAR has registered trademark in China and several overseas countries. In the countries and areas where our trademark, service identification, domain name, icon, company name, etc. have not been registered, FCAR claims ownership for non-registered trademark, service identification, domain name, icon and company name.
-
Page 3: Table Of Contents
FCAR Series Product Operation Manual Instruction Content CHAPTER 1 INTRODUCTION................... 4 GENERAL INFORMATION ..................4 MAINTENANCE...................... 5 CERTIFICATION ...................... 6 CHAPTER 2 PRODUCT STRUCTURE ................ 7 2.1 HOST STRUCTURE DESCRIPTION ..............7 2.2 FT-138 HOST PARAMETERS ................8 CHAPTER 3 HOST MENU INTRODUCTION ............9 3.1 TPMS CHECK (CHECK) ................... -
Page 4: Chapter 1 Introduction
FCAR Series Product Operation Manual Instruction Chapter 1 Introduction General Information TPMS System Review The tire pressure monitoring system (TPMS) is a kind of electric systems and designed for the use of monitoring the air pressure in the pneumatic tyres of various kinds of vehicle models. -
Page 5: Maintenance
FCAR Series Product Operation Manual Instruction If the indicator flashes, a system problem may occur, which may range from the fault sensor to the vehicle sensor that has not yet learned the vehicle. Advantages of TPMS Important advantages of TPMS are concluded as below: Fuel saving. -
Page 6: Certification
FCAR Series Product Operation Manual Instruction gasoline, etc. to wipe the host; 5）No items can be placed on the display screen to avoid the touch screen rupture or internal component damage caused by the great pressure. Certification FT-138 TPMS tester has CE, FCC and Rohs certification. -
Page 7: Chapter 2 Product Structure
FCAR Series Product Operation Manual Instruction Chapter 2 Product Structure 2.1 Host structure description Front view Bottom view... -
Page 8: Ft-138 Host Parameters
FCAR Series Product Operation Manual Instruction Host instruction Number Name Number Name ① ⑦ Display screen Right ② ⑧ Return Activation button ③ ⑨ Left ④ ⑩ Down Charging port ⑪ ⑤ Host switch USB interface ⑥ 2.2 FT-138 Host parameters... -
Page 9: Chapter 3 Host Menu Introduction
FCAR Series Product Operation Manual Instruction Chapter 3 Host Menu Introduction 3.1 TPMS check (CHECK) Switch on the power, turn on the host and enter the main interface Enter the [CHECK] menu for TPMS check to perform a series of programming and... -
Page 10: Frequency Detection
FCAR Series Product Operation Manual Instruction 3.2 Frequency detection Click [RKE] to enter, you can detect whether there is wireless data transmission at frequencies of 315M and 433M. Note: The blue progress bar represents the signal strength... -
Page 11: Setting
FCAR Series Product Operation Manual Instruction 3.3 Setting Click [SET] to enter the settings, you can set the host language, voice, automatic shutdown time, ID display format, temperature display format, pressure format and system information. Language: Set the machine language ... - Page 12 FCAR Series Product Operation Manual Instruction...
-
Page 13: Chapter 4 Tpms Activation And Programming
FCAR Series Product Operation Manual Instruction Chapter 4 TPMS Activation and Programming 4.1 Vehicle selection Select [CHECK] to enter the model selection interface Select the desired vehicle model by clicking the arrow on the host... -
Page 14: Sensor Programming
FCAR Series Product Operation Manual Instruction 4.2 Sensor programming Press “OK” to enter the TPMS activation and programming interface after the vehicle model is selected Note: The sensor at the top of the FT-138 machine is the alignment sensor during the activation and programming... - Page 15 FCAR Series Product Operation Manual Instruction...
- Page 16 FCAR Series Product Operation Manual Instruction Click on the host arrow to select the programming picture and click [OK] to enter the sensor programming menu Note: If the interface displays none, a default ID will be written while programming...
- Page 17 FCAR Series Product Operation Manual Instruction Select the wheel, the top of FT-138 is aimed at the sensor, click [OK] to program the sensor After being programmed successfully, the sensor data will be displayed, click the return key to exit...
-
Page 18: Sensor Activation
FCAR Series Product Operation Manual Instruction 4.7 Sensor activation Select the corresponding wheel in the programming and activation interface, use FT-138 to aim at the sensor position of this wheel, click [OK] or the activation key to activate the sensor. You can check the written sensor ID in the programming menu... - Page 19 FCAR Series Product Operation Manual Instruction...
-
Page 20: Chapter 5 Update
FCAR Series Product Operation Manual Instruction Chapter 5 Update There are program updates and database updates for FT-138. Entering the PC terminal upgrade interface is preferred Connect FT-138 and the PC computer terminal with the specified USB cable, click the... - Page 21 FCAR Series Product Operation Manual Instruction Click “Scan”, the PC update software will scan and check whether the FT-138 connected to the device successfully Click “Download Firmware” to automatically update the firmware (or database) from the server to the device or click “Select File” manually to locate the file which needs to...
-
Page 22: Warranty Clauses
After you are sure that the following terms and conditions are met and you have fulfilled your real information through the machine activation or user registration, you can enjoy the maintenance service provided by FCAR if there are defects related to materials or workmanship on your products;... - Page 23 FCAR Series Product Operation Manual Instruction you have carefully read the warranty clauses of this product, otherwise, 2. Please ensure that the registered complete information is deemed to you have accepted and agreed to the terms of this warranty; Your product must be purchased from our product dealer. You have to bear the maintenance cost for your product if you buy the product through non-normal channels;...
- Page 24 After you get the valid response of FCAR, you have to post your products to the address designated by FCAR for repairing and maintenance, otherwise, you will not get timely repairing and maintenance.
Need help?
Do you have a question about the IDIAGT138 and is the answer not in the manual?
Questions and answers