Sonnen Dashboard Interface; Sonnen Dashboard - Sonnen sonnenBatterie eco Gen 2 User Manual

12

sonnen Dashboard interface

▶ On your local home internet network, go to
https://find-my.sonnen-batterie.com. (For
easier future access, we recommend you save
this to your address or bookmarks bar).
▶ Once you access this webpage, you will see the
following screen. The information on the screen
should match your sonnen serial number and
local IP address.
▶ Click 'Configure' to access the settings menu.
After pressing 'Configure,' you will see a login
page.
▶ Select User from the drop down menu and
enter the password 'Sonnen2016'.
'
After logging into the
com page, you will arrive at your sonnenBatterie
dashboard. This diagram provides an overview
of your sonnenBatterie's state of charge, your
home's solar PV production, your home's energy
consumption, and the energy drawn from the
utility grid.
find-my.sonnen-batterie.

Sonnen Dashboard

Your sonnenBatterie's current State of Charge,
or how much energy is stored in the battery, is
represented by the large bars on the right side
of the diagram. The upper bar is the real State
of Charge, which is always 5% higher than the
State of Charge. (This is because there is a built-in
buffer of 5% for best practice).
Next, on the top left hand corner labeled
'Production,' is your solar PV production. It is
located under the graphic of a sun and PV panel.
This number is a real-time measurement of how
much energy, in kilowatts, you are generating with
your solar PV system.
On the top right, under the graphic of the
house is your home's energy consumption. This is
a real-time assessment of how much energy the
loads in your home are consuming in kilowatts.
Finally on the bottom left, under the transmission
tower graphic, you can find the amount of energy
being purchased from the grid.
Please note, this information is also provided
on the status page of the sonnenBatterie App and
Web Portal.
There will also be two tabs on the left side. The
System tab will provide more technical information
about the battery, such as the model number,
serial number, storage capacity, maximum inverter
power, firmware version, IP address, as well as
grid and Battery Management System (BMS)
information.
The Settings tab will allow you to select your
sonnenBatterie's operating mode, as described in
the 'Operating Mode' section on the next page.