Contents Brief introduction…………...…………………………..…..1 ……………….…..1 1. Bluetooth wireless communication technology ………………………………………………...1 2. About BTH058 Before use……………………………………………………..2 …………………………………………………...……2 1. Overview ……………………………………………3 2. Charging for Headsets Getting started……..…………………………………………3 …………………………………..3 1. Turning on/off the headsets ………………………..….4 2. Pairing headsets with Bluetooth devices ………………….………………….4 1) How to enter pairing mode ………………..….4...
HFP —— Hands-free Profile A2DP—— Advanced Audio Distribution Profile AVRCP——Audio/Video Remote Control Profile You can enjoy music wirelessly by using BTH058. It has the following features: 1) Pairing with a Bluetooth cell phone or PDA supporting HFP profile. Answer a call, end a call and reject a call...
3) Easy to switch between the call and music, you will not miss the incoming call during listening to music. 4) Every time the headset is turned on, it will connect to last connected device automatically. Note: In order to complete above function, the Bluetooth profiles of paired device must be same as the headset.
2. Charging the headset The headset comes with a built-in rechargeable battery, prior to using it, it is recommended to charge the battery fully for the first time. When the headset is low power, the headset emits five “Dong” tones every 5 minutes and the red LED flashes.
3) Activate your cell phone’s Bluetooth function and set your cell phone to search for Bluetooth devices within range, and select “BTH058” from the list of devices shown; 4) According to the indication, enter password or PIN No: “0000”( If the mobile phone supports Bluetooth V2.1, password is not required.);...
5) After successful pairing and connecting, blue LED of the headset flashes twice every 4 seconds. Remarks: The pairing password of BTH058 is “0000”. So, the headset can only pair with a Bluetooth transmitter whose pairing password is “0000”. If pairing still fails after several tries, please refer to the Bluetooth transmitter’s user’s manual for further information.
Remarks: After successful multi-pairing, the paired devices will remember each other. The headset will connect with last connected two devices automatically after turn on. The steps of turn on/off the multi-pair function as follows: Turn off multi-pair function: the headset in standby mode, not connect with device, press MFB and volume down button simultaneously and release it until hear four fall tone.
4. Reconnecting with a Bluetooth device 1) Automatic connecting Every time the headset is turned on, it will connect to last connected device automatically. 2) Manual connecting When the headset is in standby mode and not connect with device, short press any button of headset, it will connect to last connected device.
Page 10
Long press∧ ∧ ∧ ∧ button about 2 Microphone During a call mute seconds Long press∧ ∧ ∧ ∧ button about 2 Cancel mute During a call (microphone mute) seconds Short press MFB and ∧ ∧ ∧ ∧ Voice dial Standby mode (connected device) button simultaneously...
Page 11
2) Three-ways call operation Functions Status of headsets Operation Answer new call and There second Short press end current call incoming call once Answer new call and There second Double click MFB retain current call incoming call Switch calls Keep conversation Double click MFB End current call and Keep conversation...
You have to select “transmit the sound via Bluetooth” in the settings menu and then choose “BTH058” as speaker device. The music will be transmitted to the headset. Please refer to your mobile phone’s user’s manual for further information.
2) Pairing with Bluetooth device LED indicator Status of headset blue flashes Pairing mode alternately Blue LED flashes once every 2 Not connect device seconds Blue LED flashes twice every 4 Have already connected device seconds Blue LED flashes continuously Calling/incoming call Blue LED flashes once quickly During a call...
Care and maintenance Read the following recommendations carefully before using BTH058. Following these you will be able to enjoy this product for many years. Keep it dry and don’t put it in the dump place to avoid the product’s internal circuit being affected.
4. Why my mobile phone can not search and find the headset? The mobile phone will not find the headset if headset and mobile phone are not under the pairing mode. Make sure the headset is under the pairing mode and in the effective working range, and then the headset can be paired and connected.
Page 16
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Need help?
Do you have a question about the BTH058 and is the answer not in the manual?
Questions and answers