Table of Contents
Advertisement
Serial Numbers in Memory Send
3.
a message containing a serial number is completed. If the message is interrupted, the serial
number will not be incremented.
A new starting serial number may be loaded, in memory send mode by pressing
The previous serial number may be repeated by pressing, in memory send mode,
starting the message. The same serial number will continue to be sent as long as the message
number is preceeded by
V. Editing Messages in Memory
Edit Capabilities
1.
sage and deletions from any point in the message to the end of the message.
Insertion
2.
. To insert additional text in an existing message, play the message in memory send
mode and halt the message at the desired point with either paddle or the pound
to memory load, press
pressing
.
If the insertion is at the very beginning of a message, switch to memory load, press the digit of
the message location and key in the desired addition, then switch back to memory send with-
out pressing
.
Deletion
3.
. During message loading, operation of the pound
and erase the previous message from that point to the end of that message location. This may
be used for partial message deletion as well as complete message erasure.
For a partial deletion, in memory send mode, play the message to desired point and halt it with
either paddle or pound
message text may be entered if desired. Press the pound
nated at this point and the remaining text of the message will be deleted.
, where N N N N is the new, one to four digit, serial number.
.
. Messages in memory may have additions placed anywhere in the mes-
and key the desired addition. Switch back to memory send without
key. Switch to memory load, and press
. The serial number will automatically incremented when
5
key signals the end of message
. At this point additional
key. The message will be termi-
before
key. Switch
Advertisement
Table of Contents
