Radio Shack MICRO-33 Owner's Manual page 13

14-1045reimage.fm Page 13 Friday, January 12, 2001 3:56 PM
If the function switch is set to
recording begins immediately. If
the function switch is set to
recording begins and the REC/BATT
indicator lights steadily only when the
recorder picks up sound.
Cautions:
• Do not force down
cannot easily
check the microcassette tape's
erase-protection tabs (see "Pre-
venting Accidental Erasure" on
Page 16).
• To protect the recorder, press
only when a microcas-
RECORD
sette tape is loaded.
Note: To pause recording, slide the
function switch to
PAUSE
operation, slide the function switch to
the previous position.
5. If you set the function switch to
, adjust
IN VOL/VOX
level at which recording begins.
6. Press
STOP/EJECT
Note: To record on the other side of the
tape, unload the tape, turn it over, and re-
load it.
Operation
,
OFF
,
VOX IN
. If you
RECORD
press ,
RECORD
. To resume
VOX
to set the sound
to stop the tape.
13