AccuQuilt Studio 209611 Operating Instructions

c u t p r e c i s e s h a p e s w i t h o u t s c i s s o r s o r r o t a r y c u t t e r s
Roller die cutting can't get any easier. The time-saving AccuQuilt
Studio ™ is specially designed for quilt shops, fabric craft retailers
and experienced and prolifi c home quilters. It quickly and easily
cuts up to 10 layers* of fabric shapes for quilting, appliqué,
fabric-covered objects, strips and novelty projects. The only
cutter on the market, it also accommodates AccuQuilt giant
easy as 1-2-3 to use
The Studio fabric cutter system consists of three major components: a roller die cutter, steel-rule dies and cutting mat.
™
The Studio system will cut almost any fabric—up to ten layers. Follow these instructions for cutting letters and shapes:
1
Lay die fl at inside tray with FOAM
SIDE UP. Place fabric on top of die. If
desired, fan fold fabric to cut multiple
layers. Check orientation of fabric
for cutting non-symmetrical shapes.
Place cutting plastic on top of fabric.
Dies cut into reuseable sheets of cutting
plastic that provide hundreds of uses.
Find all available cutting plastic sizes at
accuquilt.com
©2014 AccuQuilt
and super giant dies. The steel roller never needs replacing and
withstands years of die cutting use. That's the kind of quality
and long-lasting durability you can depend on cut after cut,
project after project. If you have further questions, please don't
hesitate to call AccuQuilt Customer Service at 888.258.7913 or
402.934.1110. And don't forget to visit us online at accuquilt.com!
2
Push die, tray and plastic until
they contact roller. Turn handle in
the direction you want die to go.
If needed, continue pushing until
roller grabs die. Roll die and tray
through cutter.
c u t t e r i n c l u d e s :
• die tray • die pick
• ⁄ " hex wrench
3
32
• ⁄ " hex wrench
5
32
• instruction label
• user's manual
• one sheet giant cutting
plastic (60005)
call 888.258.7913 or 402.934.1110
3
Remove cutting plastic and fabric.
Occasionally, threads may need to be
snipped where cutting blades meet
on the die. Repeat process from
opposite direction.
c u t t e r s p e c i f i c a t i o n s :
• Dimensions: 24 ⁄ "W x 30 ⁄ "L x 8 ⁄
3 1 3
4 4
(63 cm x 77 cm x 22 cm)
• Cutter weight: 34 lbs. (15.4 kg)
• Boxed weight: 52 lbs. (23.6 kg)
* Number of layers of fabric varies by fabric
type and thickness.
order today @ accuquilt.com
quilt shop
Use the AccuQuilt Studio
sales and profi ts. Make it simple for your
customers to buy what they need by offering
pre-cut quilt kits in a variety of themes.
• Hand-operated fabric die cutter uses steel-rule
dies to quickly and accurately cut shapes for
quilting and fabric crafts.
• Hundreds of shapes to choose from: classic
designs, circles, hexagons, fl owers, strips, rag
quilt shapes, quilt block sets and many more.
• Cut all types of fabrics: cotton, batiks, fl annel,
fl eece, wool, denim and even leather!
• Dies never need sharpening, and the AccuQuilt
Studio ™ fabric cutter has a three year warranty.
• GO! ® Adapters for Studio
advantage of the entire AccuQuilt die collection,
more than 500 piecing and appliqué shapes!
s y s t e m m a i n t e n a n c e
The only maintenance required for the Studio
occasional replacement of the die tray and cutting plastic.
• Always use an AccuQuilt Studio
with the Studio cutter.
• Depending on usage, the die tray must be replaced
regularly. Average use requires replacement annually;
heavier use will require more frequent replacement.
• You will know the tray needs to be replaced when it
warps in the middle, when you hear a popping sound
while cutting, or when you are not able to cut as many
layers as usual.
"H
4
• Replace cutting plastic when you are not able to cut as
effi ciently as usual.
NOTE: No lubrication is necessary; all bearings are sealed.
cutter to increase
™
™ allow you to take
cutter is
™
die tray when cutting
™