Advertisement
Specifications
Pro-Bind 2000 Dimensions: 18" wide, 7
Cooling Rack Dimensions: 16" wide, 7
Net Weight: 18.25 pounds
Power Supply: 110v/60HZ
Binding Throat: 12
⁄
" x 2"
3
8
Binding Capacity: 2"
Warnings
•
Never put fingers, plastic materials or any object other than a
Pro-Bind cover into the throat of the Pro-Bind 2000.
• Never try to disassemble the machine or perform any maintenance on
the machine without first contacting an authorized Pro-Bind dealer.
• Turn off the machine and unplug unit from wall when the unit is
not in use.
• Do not use the unit around any water or liquid that may spill.
• Do not touch the heat plate directly when the unit is warming up, on
or cooling down. It will be hot and could cause burns.
Warranty
Pro-Bind offers a one-year manufacturers warranty. Contact your local
dealer for details.
Questions or Comments
Please contact your local dealer or Pro-Bind at: www.pro-bind.com
PB2000 2014
⁄
" tall, 11
⁄
" deep.
5
3
8
4
⁄
" tall, 4
⁄
" deep
1
3
2
4
Pro-Bind 2000
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Pro-Bind Pro-Bind 2000
Summary of Contents for Pro-Bind Pro-Bind 2000
- Page 1 • Never put fingers, plastic materials or any object other than a Pro-Bind cover into the throat of the Pro-Bind 2000. • Never try to disassemble the machine or perform any maintenance on the machine without first contacting an authorized Pro-Bind dealer.
- Page 2 2. Jog documents and select the appropriate cover spine capacity. 3. Place the documents into the cover. 5 - 15 ⁄ " 4. Place cover, spine down, onto the Pro-Bind 2000 heating plate. 10 - 25 ⁄ " 5. Press the appropriate cycle button (Hard Cover or Soft Cover) 6.
Need help?
Do you have a question about the Pro-Bind 2000 and is the answer not in the manual?
Questions and answers