Ethernet Lan Setup; Screen Brightness - Philips WI121 series User Manual

6.2.5 ETHERNET LAN SETUP
Setting up an Ethernet connection is just a matter of plugging the Ethernet cable in the RJ45 connector. It is advised to
switch off the WLAN connection in order to save battery power.
6.2.6 SCREEN BRIGHTNESS
The ProScribe is pre-configured to save battery power by switching the LCD brightness to a lower level when the power
plug is removed. Normal brightness is restored by going to:
"Control Panel > Tablet and Pen Settings > Display > Screen Brightness > Powered by Batteries" and by moving the slide
bar to "Bright".
WI11
17