Connecting The Microphone - Radio Shack TRC-446 Owner's Manual

21-1574.fm Page 6 Thursday, May 13, 1999 4:03 PM
4. Using a Phillips screwdriver, attach
the mounting bracket to the mount-
ing surface with the supplied large
mounting screw and star lock wash-
ers.
5. Attach the CB to the mounting
bracket using the supplied rubber
washers and mounting knobs.
CONNECTING THE
MICROPHONE
1. Align the slot on the top of the
microphone plug with the ridge
Base Station Power Setup
6
2. Secure the plug by turning the plug's
3. Slide the microphone onto the
To disconnect the microphone, unscrew
the locking nut and gently pull out the
microphone plug.
Caution: Always grasp the connector
body when you are disconnecting the
microphone. Never pull on the micro-
phone cable.
ANTENNA
R
CAT NO.: 21-1574 TRC-446 FCC ID: AAO21-1574
CUSTOM MANUFACTURED IN THAILAND FOR RADIOSHACK,
A DIVISION OF TANDY CORPORATION
FORT WORTH, TEXAS 76102
0000001
SERIAL NO.:
inside the MIC jack, then fully insert
the plug into the jack.
locking nut clockwise.
microphone holder.
PA SP EXT SP
13.8 DC Power Supply
POWER
+ -
13.8V DC