Using The Belt Clip; Connecting An Earphone/External Speaker - Radio Shack BTX-128 Owner's Manual

19-1207.fm Page 19 Friday, November 10, 2000 11:04 AM

USING THE BELT CLIP

The supplied belt clip lets you easily at-
tach the transceiver to your belt.
Slide the belt clip onto the tab at the back
of the transceiver until it clicks. To re-
move the clip, pull up on its middle tab
and slide it down.
CONNECTING AN
EARPHONE/EXTERNAL
SPEAKER
To listen privately or to hear better in a
large area such as a warehouse, you can
pull up the rubber cover on the and
EAR
jacks, then plug a monaural ear-
MIC
phone or an external speaker with a 3.5
mm ( / inch) plug (not supplied) into the
1
8
jack on the side of the transceiver.
EAR
19
Preparation