Mounting using anchor
screws
To mount the SonicPoint using included anchor screws:
1
On the mounting surface, mark the location to
make two screw holes. The marks should be
horizontally parallel to each other.
2
Drill the holes to accommodate the metal anchor
screws.
3
Screw the anchor screws into the holes to their full
depth.
4
Insert the 5/8" screws into the anchors, and screw
them in deep enough to leave minimal space
between the screw heads and the wall surface.
5
(Optional) Attach the front LED/logo cover plate to
the top of the SonicPoint and if necessary, rotate it
to the desired position.
6
Supporting the SonicPoint in your hands, securely
fit the underside slots of the SonicPoint onto the
screw heads.
32
| Mounting using anchor screws
See also,
Product safety and regulatory information
page 41.
on