1. Servicing the vehicle When servicing (i.e. changing the oil, washing your car) your automobile, the CompuStar system should be in Valet Mode. There is a safety shutdown switch under the hood that deactivates the remote starter function if the hood is open.
Page 3
Remote-Pager Button Functions Button Pressed For Function 1/2 sec Lock/Unlock 1/2 sec Auxiliary Option 1 1/2 sec Auxiliary Option 2 1/2 sec Query Function 2 sec 2 sec Auto-start Function - on/off II - 2 sec Trunk Release – on/off III - IV - 2 sec...
If your remote has a problem starting the vehicle, CompuStar will try 2 additional times. If the engine does not start after the third attempt, please call your authorized CompuStar dealer.
Page 6
Your vehicle is now ready for auto-starting. However, the reservation mode will be cancelled if the door is opened or the CompuStar system is put in Valet mode after the reservation has been set. Once cancelled, you will have to start the vehicle with the manual key and repeat the above 5 steps if you want to restore reservation mode.
later, the cause for the error will be indicated by the number of times the car chirps and parking lights flash. See Page __ for error messages. Canceling Reservation Mode If you do not want to set reservation mode, shut off the engine before you exit the vehicle.
Query Function Query Function Query Function allows the owner to visually monitor the status of your car. Press Button IV for a ½ second to activate the Query Function. Status of Car Parking Light Flash Lock, Engine Off Once Unlock, Engine Off Twice Lock, Engine On Three Times...
Safety Shut Down Features Safety Shut Down Features CompuStar 1WAM4R system has several shut down safety features. The following actions will shut down the engine or prevent the car from auto-starting: Opening of the car engine hood, Pressing of the brake or Valet mode is turned...
Consult the authorized dealer for this mode. OPTIONAL INSTALLATION FEATURES OPTIONAL INSTALLATION FEATURES The CompuStar 1WAM4R remote has additional features and expansion possibilities that require additional parts and labor. Cold Start Mode Cold Start Mode If the optional temperature sensor has been installed, Timer Start Mode becomes Cold Start Mode.
Need help?
Do you have a question about the 2WFMRS and is the answer not in the manual?
Questions and answers