Summary of Contents for Microh RIO IP PAR 186
- Page 1 USER MANUAL RIO IP PAR 186 Please read this user manual before using this product...
- Page 3 Please install and operate the fixture according to instructions. Meanwhile, please keep this manual for future reference. The MICROH RIO IP PAR 186 fixture uses 18 x 12W RGBWA+UV (6 in 1) LED’s which feature high brightness and stability. Please carefully unpack it when you receive the fixture and check if it was damaged during transportation.
-
Page 4: Safety Instructions
If your power cord is damaged in any way, please purchase a new power cord from your local MICROH dealer. Always disconnect power, when the device is not in use or before cleaning it. Never pull out the plug by tugging the power cord. -
Page 5: Key Description
Key Description MENU: Access the menu DOWN: “reduction key” or “key under the selected”; decrease the value function down menu. “add key” or “selection on the key”; increase the value function, shift on the menu ENTER: Is used to select and confirm/store the current selection Menu Display Number... - Page 6 DMX512 Controller Channel Function 6 Channel Mode Channel Function Description Red dimming Red dimming (0 - 100%) Green dimming Green dimming (0 - 100%) Blue dimming Blue dimming (0 - 100%) White dimming White dimming (0 - 100%) Amber dimming Amber dimming (0 - 100%) UV dimming UV dimming (0 - 100%)
- Page 7 Connectors RIO IP PAR 186 INPUT OUTPUT* *Includes protective cover ADAPTORS...
-
Page 8: Dmx -512 Control Connections
3 pin XLR input or the RIO IP PAR 186. To connect the units to DMX, you must daisy chain the fi xtures together as a referred in the diagram below. Always end your DMX-512 connection with a DMX terminator. -
Page 9: Mounting And Installing
Improper installation can result in bodily injury or damage. Regardless of the rigging option you choose for your MICROH RIO IP PAR 186 fixture, always be sure to secure your fixture with a safety cable. The fixture provides a built-in rigging point for a safety cable hanging bracket. -
Page 10: Cleaning And Maintenance
Cleaning and Maintenance Disconnect from main power before starting maintenance operation! The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics. - Page 12 For more information please contact: www.microhpro.com info@microhpro.com 905.428.9062...
Need help?
Do you have a question about the RIO IP PAR 186 and is the answer not in the manual?
Questions and answers