Advertisement
Quick Links
Advertisement
Summary of Contents for AlertMe CT30
- Page 1 Install Guide AlertMe Thermostat Control Start Saving Money. Stop Wasting Energy.
-
Page 2: What's In The Box
Installed in your home, the Thermostat allows you to manually adjust the temperature and switch between Heat, Cool and Off modes. AlertMe Hub Your AlertMe Hub talks wirelessly to your In Home Thermostat and connects securely to the Internet, putting your Thermostat online. Keyfobs x 2 Your Keyfobs attach to your keyring to tell your system when you are in or out of the house, enabling it to adjust your system accordingly. - Page 3 The installation guide The following steps will guide you through the installation of your AlertMe system, as well as set up of your Home Heating and AC schedule. Before you start Before you start You will need access to your broadband router, computer and 2 spare power sockets.
- Page 4 Terms and Conditions Once you have read the Safety Notices and Terms & Conditions by clicking on the orange text in the middle of the screen, please tick the box and click “Continue”. Register your kit The Hub ID can be found on the back of the hub, below the power and ethernet sockets.
- Page 5 Power up your devices The hub is now connected; you now need to power up your other devices. For installation it is best to have these devices placed within two metres of the AlertMe hub, they can be moved away later.
- Page 6 The install process is now complete. Click “Close” when you are ready to name and place the accessories. Home schedule set up Once you have installed your AlertMe kit, you will be prompted to set up your Home heating schedule. Home schedule settings Select your time zone and the temperature unit you would like your system to use.
- Page 7 The ZIP code entered will be used for gathering data on your ‘Weather’ widget, so be sure to set this correctly. These can be amended at any time, remember to select ‘Save’ to keep any changes you have made. Now head to your AlertMe home page - the installation is now complete!
-
Page 8: Frequently Asked Questions
My thermostat was in serach mode but is no longer. For any further questions or support on the system, please contact our Customer Support If the Thermostat has time out of search mode, repeat the steps above. on 0888 882-4440 or support@alertme.com... - Page 9 (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [see FCC rule 15.19 (3) (5)] Caution! Changes or modifications not expressly approved by Alertme.com could void your authority to operate this equipment. [see FCC rule 15.21] NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 10 Start Saving Money. Stop Wasting Energy.
Need help?
Do you have a question about the CT30 and is the answer not in the manual?
Questions and answers