1. Manuals
  2. Brands
  3. CCL Manuals
  4. Weather Station
  5. C8478A
  6. User manual

CCL C8478A User Manual

Wi-fi weather station with 6-in-1 professional sensor
Hide thumbs Also See for C8478A:
Table of Contents

Advertisement

Quick Links

Download this manual
Mounting pole
not included

Advertisement

Table of Contents
loading

Related Manuals for CCL C8478A

Summary of Contents for CCL C8478A

  • Page 1 Mounting pole not included...

  • Page 3: Table Of Contents

    Introduction ......... . . 1 Overview.

  • Page 4: Main Console

    gathers and automatically uploads accurate and detailed weather data to Weather Underground website - the famous weather service which allows weather observers to upload their local weather data with automated personal weather stations (PWS) - at which you can or serious weather enthusiasts robust performance with a wide range of options and sensors. You will get your own local forecast, high/lows, totals or averages and graphs for virtually all weather variables without using a PC.

  • Page 5: Lcd Display

    6. LCD display 12. Status LED 13. Wall mounting holder 22. Battery compartment update only) 24. Table stand 21. Backlight dimmer sliding 25. Power jack...
  • Page 6 1. Outdoor temperature & humidity 6. Time, sunrise/sunset & system status 2. Indoor temperature & humidity 7. Weather forecast 3. Calendar & moon phase 8. Barometer 4. Wind direction & speed 9. Rainfall 5. Weather index 10. Multi-function historical bar chart 1.
  • Page 7 1. Wind vane 7. Battery door 2. Wind cups 3. Antenna 9. Transmission status LED 4. Radiation shield 10. Level gradienter 11. Rain collector diameter pole) 12. UV sensor 6. Hygro-thermo sensor 13. Solar panel...

  • Page 8: Wireless 6-In-1 Sensor

    1. Remove the battery door of the sensor. 2. Insert 2 x AA size batteries into the battery compartment. Make sure you insert them the right way according to the polarity information marked on the battery compartment. new channel that you decided, then press key on the console, and then press key on the sensor to pair the sensor with the console again.
  • Page 9 better and more accurate wind measurements. 2. Choose an open area within 150 meters from the main console. 3. Install the sensor as level as possible to achieve accurate rain and wind measurements. Use the level indicator on the sensor to ensure a level installation. 4.
  • Page 10 history records. - Time & Date - Bar chart records By battery backup - Max/Min records - Past 24 hours weather history data records - Alert setting values - Router setting - Latitude and longitude By built-in memory backup - Weather server setting - Time server link - Channel history This weather station console will synchronize the clock with the UTC time server once you set...
  • Page 11 You need to validate your email address before you can register your weather station. Click “Send Validation Email” to receive an email from wunderground.com that contains a validation 2. After you have created your account and completed the Email validation, please go back to the WUndergound web page.
  • Page 12 4. Enter a name for your PWS, then choose “Other” for “Station Hardware”. Once you have completed, click “Submit”. 5. Jot down Your Station ID and Station key for the further setup step.
  • Page 13 wunderground.com time start up, or press and hold the key for 6 seconds in normal mode, SSID: PWS-XXXXXX. 3. Once connect, open the internet browser and enter 192.168.1.1 into the URL blank, then press the Enter 192.168.1.1 in the URL blank.
  • Page 14 4. Fill in the connection information for the setup interface. Your PWS will base on this Language: English WiFi Router setup Router: ROUTER_A Add Router Security type: WAP2 Router Password: Weather server setup Web server URL: rtupdate.wunderground.com Station ID: Station key: Time server setup Server URL: nist.time.gov...
  • Page 15 5. Click “Apply information. smart phone or computer and start to search for the router that you have assigned. If the icon Supported device Android smartphone, Android pad, iPhone, iPad or Windows laptop 802.11 b/g/n, supports AP mode Browsers that support HTML 5, such as the latest version of Chrome, Web browser Safari, IE, Edge, Firefox or Opera 802.11 b/g/n...

  • Page 16: Wireless Indoor Sensor

    1. To view the wireless 6-IN-1 sensor's live data in a web browser (PC or mobile version), please visit www.wunderground.com, and then, In the menu bar, enter your “station ID” in the searching box. The weather information will show up on the next page. 2.

  • Page 17: Wind

    The TIME and DATE information windows locate at the bottom left of the console display. You can view all the time related information and console status in these two sections. The moon phase is determined by the time, date and time zone. The following table explains the moon phase icons of the Northern and Southern hemispheres.
  • Page 18 ” mode. After the console has connected to the internet, it will attempt to connect to the internet time server to obtain the UTC time. Once the connection succeeds and the console's time has been updated, the “ ” icon will appear on the LCD. The time will automatically synchronize Internet time server at 12:00AM and 12:00PM per day.
  • Page 19 1. In normal time mode, press and hold key for 2 seconds until the alarm hour digit 2. Press key to adjust the value, or press and hold to change rapidly. 3. The setting sequence is: Hour Minute. 4. After completing the minute setting, press key to save and exit the setting mode.
  • Page 20 INDOOR The INDOOR window displays the thermo-hygro reading of wireless indoor thermo-hygro sensor(s) (Ch.1 -Ch.7) Please locate the sensors where console can receive good signal. This console is capable to pair with up to 7 wireless indoor thermo-hygro sensors. If you have 2 or more sensors, you can press in normal mode, or press and hold key for 2 seconds to toggle auto-cycle mode...

  • Page 21: Weather Index

    Real time wind Past wind directions direction indicator indicator of last 5 minutes Wind direction in 360° Wind speed level or 16-direction Average / gust wind speed In normal mode, press key to switch between wind speed and wind speed. 1.
  • Page 22 < 1 km/h < 1 mph Calm Calm. Smoke rises vertically. < 1 knots < 0.3 m/s Smoke drift indicates wind direction. Light air Leaves and wind vanes are stationary. Wind felt on exposed skin. Leaves Light breeze rustle. Wind vanes begin to move. Leaves and small twigs constantly Gentle breeze Dust and loose paper raised.

  • Page 23: Weather Forecast

    Widespread vegetation and structural Violent storm damage likely. Severe widespread damage to Hurricane force vegetation and structures. Debris and unsecured objects are hurled about. A combination of the wireless 6-IN-1 sensor's temperature and wind speed data determines the current wind-chill factor.

  • Page 24: Barometric Pressure

    - The “Snowy” icon will be displayed when the outdoor temperature is below -3°C (26°F), and under cloudy or rainy forecast. The barometric pressure window (BARO) locates in the middle right of the LCD the atmospheric pressure is the pressure at any location of the Earth caused by the weight of the column of air above it.

  • Page 25: Rainfall

    3. Press key to switch to “ ” mode. 4. Press key once again, the “ 5. Press key to change its value. 6. Press key to save and exit the setting mode. - When you change the RELATIVE atmospheric pressure value, the weather indicators will change along with it.
  • Page 26 Barometric hPa, inHg and Past 72 hours pressure mmHg Indoor temperature (according to the °F or °C Past 72 hours current channel) Outdoor °F or °C Past 72 hours temperature Indoor humidity (according to the Past 72 hours current channel) Outdoor humidity Past 72 hours Rainfall...
  • Page 27 - Press and hold The console automatically stores the weather data of the past 24 hours. 1. Press key to check the beginning of the current hour's weather data, e.g. the current time is 7:25 am, March 28, the display will show the data of 7:00am, March 28. 2.
  • Page 28 5. Press any key on the front side to save and back to normal mode, or it will automatically back to normal mode after 30 seconds without pressing any key. Press after 2 minutes. - Once the alert is triggered, the alarm will sound for 2 minutes and the related alert icon will the weather reading is out of the alert range.
  • Page 29 1. Remove the 2 screws at the bottom of the radiation shield. 2. Gently pull out the shield. 3. Carefully remove any dirt or insects on the sensor casing (do not let the sensors inside get wet). 4. Clean the shield with water to remove any dirt or insects. 5.

  • Page 30: Main Console

    batteries. Plug the USB mass storage driver to the USB socket at the right side of the main console. - In the meantime, do not remove the USB mass storage driver. update process. the update status as below: 6. Once the update completed, the main console will restart and return to the normal display screen.
  • Page 31 - Read and keep these instructions. - Do not subject the unit to excessive force, shock, dust, temperature or humidity. - Do not cover the ventilation holes with any items such as newspapers, curtains etc. - Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint- free cloth.

  • Page 32: In-1 Sensor

    Dimensions (W x H x D) 215 x 172 x 29mm (8.5 x 6.8 x 1.1in) Weight 639g (with batteries) Main power DC 5V, 1A adaptor Backup battery 3 x AAA size 1.5V batteries (alkaline recommended) Operating temperature range 802.11 b/g/n 2.4GHz Supported device for setup UI or PCs: Android smart phone, Android pad, iPhone, iPad or...
  • Page 33 Sunny/Clear, Slightly Cloudy, Cloudy, Rainy, Rainy / Stormy Weather forecast and Snowy Display modes Current Memory modes Historical data of past 24 hours, daily Max / Min Alarm Pressure change alert The following details are listed as they are displayed or operate on the console. Temperature unit °C and °F Display range...
  • Page 34 The following details are listed as they are displayed or operate on the console. Unit for rainfall mm and in Accuracy for rainfall Range of rainfall Resolution 0.254mm (0.01in) Display modes Current Memory modes Historical Data of the past 24 hours, daily Max Rainfall display mode Hourly / Daily / Weekly / Monthly / Total rainfall Alarm...
  • Page 35 Dimensions (W x H x D) 61 x 113 x 39.5mm (2.4 x 4.4 x 1.6in) Weight 144g (with batteries) Main power 2 x AA size 1.5V batteries (alkaline recommended) Weather data Temperature and humidity RF frequency 915Mhz (US) / 868Mhz (EU, UK) / 917Mhz (AU) RF transmission range 150m Transmission interval...

Table of Contents