Philips 200P7 E-Manual page 3

Product Information
How to enable SmartImage
1. Press
2. Keep press
3.
The SmartImage on screen display will remain on screen for 3 seconds or you can also press "OK" to make
confirmation.
Expect using
and close the SmartImage OSD.
There are six modes to be selected:
1. Office Work: Select this mode for general office application, like word processing, spreadsheet, and email. The
screen is dominated by text.
2. Internet: Select this mode for Internet application, especially web browsing. The screen is mixed by text and
picture.
3. Image Viewing: Select this mode for image viewing application, especially in slid show. The screen is
dominated by picture.
4. Video Playback: Select this mode for video application, like Microsoft Media Player or Real Player. The screen
is dominated by video.
5. Custom: Select this mode for you to adjust the rate of luminance, contrast gap, color boost, sharpness, and
text enhancement by yourself.
Press
●
between
file:///D|/My%20Documents/dfu/200P7/english/200p7/product/product.htm (2 of 10)2005-12-14 9:24:44 AM
to launch the SmartImage on screen display;
to toggle between Office Work, Internet, Image Viewing, Video Playback, Custom, and Off;
key to scroll down, you can also press
Press to enter sub-
●
menu selections
or to toggle
Exit
❍
Luminance
❍
Contrast Gap
❍
Color Boost
❍
Sharpness
❍
Text Enhancement
❍
Reset
❍
to adjacent sub-
●
menu selections
Then, press "OK" to go
●
back to sub-menu and
SmartImage OSD.
buttons to choose and press "ok" to confirm selection