Download Print this page

Radio Shack 640-4321 Material Safety Data Sheet page 3

Component cooler

Advertisement

TECH SPRAY, INC.
P O BOX
949
88 NORTH HUGHES
AMARILLO
TX
79105
(806) 372-8523
* * * * * * *
-------------------------------------------------------------------------
Evacuate area.
Ventilate area well and avoid breathing vapors.
concentration will be highest along the floor and in low lying areas.
Pick up the liquid on a suitable absorbant and store in sealed
containers.
* * * * * * *
-------------------------------------------------------------------------
Material may be disposed of by a licensed reclaimer or incineration
facility.
Consult local, state, and federal disposal authorities for
approved procedures.
Do not incinerate or destroy aerosol cans.
* * * * * * *
-------------------------------------------------------------------------
Respiratory Protection:
If levels exceed TLVs, increased ventilation or an organic vapor mask
may be required.
Ventilation:
Do not use in closed space.
Hands:
Solvent-resistant gloves such as Viton(R)*, Polyvinyl alcohol.
Eyes:
Wear splash-proof safety goggles or glasses.
Special Precautions:
Keep aerosol cans in cool place out of direct sunlight.
all chemicals out of reach of children.
industrial use only.
* * * * * * *
-------------------------------------------------------------------------
TSCA Inventory Status:
The cold fill of the product is approximately 4.5 oz (127.58g).
* Viton(R) is a registered trademark of DuPont Dow Elastomers
-------------------------------------------------------------------------
Prepared By:
R. Moore
NL=Not Listed
NIF=No Information Found
NA=Not Applicable
VI--SPILL OR LEAK PROCEDURES
VII--WASTE DISPOSAL METHODS
VIII--EMPLOYEE PROTECTION
IX--OTHER INFORMATION
Reported/Included.
Date:
05-27-93
Page 3 of 3
MATERIAL SAFETY DATA SHEET
RS 64-4321 Aerosol
* * * * * * *
* * * * * * *
* * * * * * *
Ventilation required.
Keep this and
This product is intended for
* * * * * * *
NE=Not Estabilished
Vapor

Advertisement

loading