Advertisement
Quick Links
HL8860 Audio 2.4GHz RF
INSTRUCTION MANUAL
Federal Communications Commission (FCC) Statement
You are cautioned that changes or modifications not expressly approved
by the part responsible for compliance could void the user's authority to
operate the equipment
FCC- Class B
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
E-CORE TECHNOLOGY (CHINA) CO., LTD.
Advertisement
Summary of Contents for E-Core HL8860
- Page 1 HL8860 Audio 2.4GHz RF INSTRUCTION MANUAL Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment FCC- Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
-
Page 2: Technology Specification
Product brief Introduction HL8860 wireless Audio controller adopt 2.4GHz RF technology, with steady connection capacity, far distance, low function wastage; beautiful outlook, good handle , make you ear be personally on the... - Page 3 TX LEDand Key Function Description Connector Description Audio in Analog audio source input USB / Power in USB audio input / 5V Power source Switch Function Description CONNECT ID When simultaneously press the Learning buttons both on Tx and Rx system Trigger board longer than 3 seconds, the ID learning process will be enable.
- Page 4 Use Introduction Open RX battery cover， put in 2pcs 1.5V AAA batteries as RX LED and Key Function Description battery box polarity indication, then close it. 2) Insert DC 5V power adapter into the USB slot of transmitter, then “LED1” will blink slowly, and “LED2” will keep on Switch Function Description...
- Page 5 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions” (1).This device may not cause harmful interference, and (2).This device must accept any interference received, including interference that may cause undesired operation. This device complies with Part 15 of the FCC Rules.
Need help?
Do you have a question about the HL8860 and is the answer not in the manual?
Questions and answers