Playing The Demo Tunes; Playing Rhythms - Radio Shack LK-1261 Owner's Manual

Light-up midi keyboard
Table of Contents

Advertisement

POWER/MODE
2.
Use the TEMPO buttons to change the tuning of
the keyboard.
Example: Lower tuning by 20.
T u n e
NOTE
• If you leave the tuning screen on the display for about five
seconds without doing anything, the screen is automatically
cleared.
• In step 2 of the above procedure, you could also use the number
buttons to input a value from 00 to 50.
• Pressing both of the TEMPO buttons (
returns the tuning setting to 00.
• Pressing the SONGS button changes the tuning setting to 00.
• The tuning setting does not affect any of tunes.
• You can tune the keyboard within a range of approximately
±50 cents (100 cents = 1 semitone).
• The tuning setting is automatically set to 00 whenever you turn
the keyboard on.
• Pressing the DEMO button changes the tuning setting to 00.
• The tuning operation does not affect rhythm (99 PERCUSSION).

Playing the demo tunes

You can set up the keyboard to continually play its 100 built-
in tunes.
Keyboard keys light to indicate the melody notes of the demo
tune as it plays.
To start demo tune play
1.
Switch power on and adjust the volume level.
2.
Press the DEMO button.
• Demo tune play continues in a sequential endless loop
until you switch it off.
• The number and name of the demo tune currently
playing are shown on the display.
• You can play along on the keyboard while a demo
tune is playing back.
E-18
LK-1261_e_14-21.p65
DEMO
START/STOP
TEMPO
(
)
/
) at the same time
Page 18
RHYTHM
3.
You can change the demo tune play being played
by pressing the number buttons.
• The tunes play back in tune number sequence, starting
from the one you select.
To stop demo tune play
Press the DEMO button or START/STOP button again to stop
demo tune play.
NOTE
• Only the following buttons are enabled while a tune is being
played.
• MAIN VOL slider
• Number buttons
• START/STOP button
• POWER/MODE selector (OFF)
• DEMO button
• KEY LIGHT button
• VOICE button
• You cannot change the tone being used for the melody of a
tune.

Playing rhythms

This keyboard features a collection of 50 exciting built-in
rhythm patterns. Each pattern provides percussion back up
for all your performances.
To select and play a rhythm
1.
Set the POWER/MODE selector to NORMAL.
2.
Find the rhythm you want to use in the "Rhythm
List" (page A-2) and note its rhythm number.
3.
Press the RHYTHM button.
• When you do, the RHYTHM indicator appears.
• The number and name that appear on the display
indicate the currently selected rhythm.
04.6.15, 3:33 PM
Adobe PageMaker 6.5J/PPC
Number buttons
648U-E-020A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

42-4068

Table of Contents