Advertisement
Quick Links
LCN-GT6
®
Sensor-keypad with
The LCN-GT6 (LCN-GTS6) is a 6-key sensor-keypad for the T-Port.
The integrated temperature sensor can be used on
(Juni 2013) or after.
The sensor keys are each equipped with an additional status-LED and a blue background
light.
®
A corona - surrounding light with white LED´s, serves as
a decorative wall light (LCN-NUI required) and can be
switched as a decent orentation light, so that the LCN-
GT6 (LCN-GTS6) can also be operated in darkness.
The 6 capacitive working
behind a 5mm thick glass front. A soft touch to the
surface is enough to trigger off the functions.
captions on the sensor keys can be carried out individual-
ly per inlay and can be changed anytime without difficulty.
Installation guide
6 keys and temperature sensor
sensor keys are situated
LCN-GTS6
LCN modules with 1706.. firmware
A1
L1
A3
L3
The
A5
L5
®
A2
L2
A4
L4
A6
L6
1
Advertisement
Summary of Contents for LCN LCN-GTS6
- Page 1 ® Installation guide Sensor-keypad with 6 keys and temperature sensor The LCN-GT6 (LCN-GTS6) is a 6-key sensor-keypad for the T-Port. The integrated temperature sensor can be used on LCN modules with 1706.. firmware (Juni 2013) or after. The sensor keys are each equipped with an additional status-LED and a blue background light.
- Page 2 LCN-GT6 (LCN-GTS6), mounting plate, 2 screws 3,2 x 15mm & inlay sheet (blank). How it functions The sensor keys of the LCN-GT6 (LCN-GTS6) react to a touch on the glass surface. Depending on the duration of touch, an appropriate LCN-control command (Hit, L ) will be sent.
- Page 3 When the temperature sensor is in use, no heat sources should be in the flushed mounted box! (An LCN-UPP with a high (dim-) load would falsify the measured value! ) Apart from that, the LCN-GT6 should not be installed near lights...
- Page 4 LCN-GT6 (LCN-GTS6) will be automatically recognized from the module and the temperature registered in the variable 3 - you can check the value in the analogue status window of the LCN-PRO. Key assigment (Key-Mapping): According to customers wishes, larger keys can be assigned in the LCN- PRO menu Ports .
- Page 5 LCN-GT6 (LCN-GTS6) Installation: Oben At the bottom area, the LCN-GT6 must be hooked into the corners of the mounting frame and pressed towards the wall. Through pushing in the plastic slider on the side, the LCN-GT6 is locked firmly onto the mounting ISSENDORFF frame.
- Page 6 You will find the inscription software GT-Designer on our homepage LCN.de in the download area, for creating captions on your GT-inlays. The inlay must be cut to 61mm * 75mm. Standard 80g printing paper is appropriate and easy to handle.
- Page 7 LED´s will light up brighter, that is important with direct sunlight or when a reading precision is desired from a long distance. The power supply LCN-NUI is connected to the I-Port of any module with year of manufacture 2013 or later, and optional supplies the T-Port over the module.
- Page 8 Function keys: 6 capacitive sensor areas behind 5mm glass with the functions Hit / L REAK LED´s: 6 LED´s for displaying LCN status messages functions: O , 2 brightnesses LINKS LICKERS key background LED´s (blue), funktions: O ®...