Radio Shack FLATFOTO B-020405 Owner's Manual page 33

■FLATFOTO configuration screen
Beep tone
Deletes all the images on
the camera.
Deletes all the data in the
camera's internal memory
and formats (initializes) the
memory.
Number of images shot/
Number of available shots
Updates the screen to show
the latest information on the
camera.
✽ Clicking the [Update] button
when you connect another
camera to the PC updates the
screen to show the information
for the new connected camera.
About the file counter (file numbers)
File numbers (No. 0001 to 9999) are automatically assigned to images when they are shot. The assigned file numbers are then saved
with the images during downloading.
✽ Because the file numbers are assigned when shots are taken and stored on the camera, the file numbers of images do not change
while they remain on the camera.
✽ If you delete an image on the camera after shooting it, the file number of the deleted file is skipped.
✽ When you reset the file counter, the file numbers for the next images shot begin again from "0001". However, the file counter can only
be reset when [Delete All Images] or [Format] is selected in the "FLATFOTO Config" screen.
Image size VGA : 640 × 480 pixels
QVGA: 320 × 240 pixels
Battery charge level
Resets the file counter.
✽ The file numbers for the next
images shot begin again from
"0001".
✽ Only available when [Delete
All Images] or [Format] is
selected.
Current file counter setting
(the file number of the next
image shot)
Closes the window