2.5 Function of HS11 Bluetooth stereo headphone
2.5.1 Power-on
1.
Press and hold Play/Pause button for 3 seconds until Blue LED quickly flashes 3 times.
2.
When it is connected with any Bluetooth device (including Bluetooth stereo transmitter such
as TX10, Dongle or Bluetooth mobile phone), Blue LED flashing becomes slower.
2.5.2 Power-off
Press and hold Play/Pause button for 6 seconds, the Red LED will turn off after a quick flash of 3
times.
2.5.3 Volume Control.
1.
One click on Volume Up button will increase the volume by one level.
2.
One click on Volume Down button will decrease the volume by one level.
2.5.4 Forward/ Backward
When HS11 is connected with a regular dongle using IVT BlueSoleil software, you can use the
Forward/Backward button to select the desired music.
3. Charging
There is a rechargeable lithium-Polymer battery inside the headphone and transmitter. Please
charge HS11 and TX10 before using them.
Please pay attention during battery charging:
1.
It will take two hours to complete charging process.
2.
Red LED is solid on during charging.
3.
Red LED will turn off when the charging process is completed.
4.
HS11 and TX10 will be instantly reset when you plug the charger into HS11 and TX10. You
can use this method to reset the product and restart it if you find the product is under
abnormal status.
5.
If you want to charge by computer, please connect HS11 and TX10 to a high-powered USB
2.0 port or an extra-powered USB 2.0 HUB using the USB cable that comes with the package.
High-powered USB ports are typically found on the computer itself (not on your keyboard or
other low-powered peripherals).
Note: HS11: If you hear a beep every 20 seconds during the device operation, it means the battery
is low. Please charge it immediately!
Note: TX10: If Red LED is flashing, it means the battery is low. Please charge it immediately!
FreeStyler HS11, TX10 User Manual
- 7 -