The Fcc Wants You To Know; Your Comments Are Requested; Customer Service; Limit Of Liability Statement - Ioline SmarTrac I/S Using Manual

Signcutter
Table of Contents

Advertisement

Ioline

The FCC Wants You to Know...

This equipment generates and uses radio frequency energy and, if not in-
stalled and used properly (in strict accordance with manufacturer instructions),
it may cause interference to radio and television reception. Operation is sub-
ject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, in-
cluding interference that may cause undesired operation. If this equipment
does cause interference to radio or television reception - which can be deter-
mined by turning the equipment off and on - you are encouraged to try to
correct the problem by one or more of the following measures:
• Use only shielded interface cables.
• Reorient the receiving antenna.
• Relocate the host computer with respect to the receiver.
• Move the host computer away from the receiver.
• Plug the host computer into a different outlet so that the host computer
and receiver are on different branch circuits.
If necessary, consult the dealer or an experienced radio/television technician
for additional suggestions. The following booklet, prepared by the Federal
Communications Commission, is a helpful reference:
How To Identify and Resolve Radio-TV Interference Problems:
The stock number is: 004-000-00345-4
This booklet is available from:
U.S. Government Printing Office
Washington, D.C. 20402

Your Comments Are Requested

Ioline Corporation is interested in comments on our documentation and prod-
ucts. Please send corrections or suggestions to:
IOLINE CORPORATION
14140 NE 200th Street
Woodinville, WA 98072 USA
Voice: (425) 398-8282
Fax: (425) 398-8383
www.ioline.com
info@ioline.com
This User Guide is provided for informational purposes only. The contents
are subject to change without notice, and Ioline Corporation assumes no re-
sponsibility for any errors that may be contained herein. No part of this User
Guide may be copied, disseminated, or distributed without the express written
consent of Ioline Corporation.

Customer Service

Ioline Corporation is committed to providing quality service and support to
our customers. If you need assistance with an Ioline product, contact your
local dealer or Ioline authorized service center. You may also contact the
Ioline Customer Service Department
Monday through Friday
7:00 A.M. - 5:00 P.M. U.S. Pacific Time
Voice: (425) 398-8282
Fax: (425) 398-8383
techsupport@ioline.com
www.ioline.com
Ioline has many years of experience working with sign makers and designers.
Feel free to contact us if you have questions or to share information.

Limit of Liability Statement

It is the responsibility of the operator of the signcutter to monitor the perfor-
mance of the signcutter and maintain it in proper working condition by fol-
lowing the instructions in this User Guide. It is the responsibility of the opera-
tor of the signcutter to follow all safety precautions and warnings that are
described in this User Guide. Ioline is not responsible for injuries that may
occur as a result of unsafe operating procedures. Ioline is not responsible for
substandard operational performance as a result of failure to maintain the
signcutter as described in this User Guide.
24

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents