Advertisement
Quick Links
Dear customer,
We would like to thank you for purchasing the
"Spinner".
A great deal of thought and planning was invested
in the process of creating our Spinner and we're
positive that following the instructions in the user
manual will benefit you most.
We recommend reading the instruction manual
before operating the "Spinner".
1
Advertisement
Summary of Contents for L.B.Spinner Spinner
- Page 1 We would like to thank you for purchasing the “Spinner”. A great deal of thought and planning was invested in the process of creating our Spinner and we’re positive that following the instructions in the user manual will benefit you most.
- Page 2 Prior to initial use, rinse out thoroughly the parts of the product that come into contact with meat (all parts except the motor). After usage, we recommend using the original case arrangement in order to enable easy and proper locking and arrangement of the case. The tripods must be attached to each other in an opposite direction, with one screw located in between the “legs”...
- Page 3 Assembly Instructions 1. Connect the motor to the first rod (1) and tighten the screw. The screw should be laid on the motor’s axis’s flat side. 2. After doing so, connect the rest of the rods (2+3) in the order shown below.
- Page 4 3. Pull one of the forks through the first spit (1); Make sure that the fork is located at least 20 cm / 8 in away from the motor. Skewer the meat on the skewer. Keep horizontal for optimal roasting.
- Page 5 4. Screw the first tripod (1) to the motor’s connecting pin. Connect the other tripod (2) to the skewer’s edge. 5. Change “Spinners” height using the screw located in the center of the tripod. 6. Turn the motor on and test proper rotation of the skewer.
- Page 6 (-) side facing towards the button (you can find a sticker showing the direction on the gripping handle). • Do not lift the“Spinner” by holding the handle only, but by supporting both the motor and the skewer’s tip. • Meat must be placed near or above the heat source.
- Page 7 The “Spinner” carries up to 10Kg/22lbs. • Working according to the instructions will ensure that the motor and the tip of the skewer temperature is just right for you to hold it using your bare hands without getting burned.
- Page 8 6 kg / 13 lb per use. We recommend using high-quality alkaline batteries and carrying an extra pair. • After using the “Spinner”, do not leave the batteries inside the motor, remove and return them to their designated place in the case.
- Page 9 • Under no circumstance should the forks be placed on the ground due to the risk of stepping on sharp edges. • Do not use the “Spinner” for any purpose other than the purpose for which it was created.
- Page 10 • Fire safety rules must be followed and when done roasting, fire must be extinguished completely. • The “Spinner” is designed for manual assembly and handling only. T ools of any kind are not to be used at any time with the product.
- Page 11 Product Warranty • L.B. Spinner Inc. (“The Manufacturer”) commits at its discretion to repair or replace, free of charge, any part or parts of the product, should it be found defectiveon account of material defects or on account of the Manufacturer’s workmanship, throughout...
- Page 12 maintenance or any incorrect or unreasonable use of the product, or the result of negligence or accidental damage. 2. Any alterations or repairs made or handled by anyone other than a representative authorized by the manufacturer. Warranty period Motor warranty: 12 months from the date of purchase.
- Page 13 Warranty does not cover: 1. Any damage caused due to direct contact of the motor/power button with water. 2. Erosion of screws due to over-tightening. 3. Dents in motor axle or any failure caused due to improper handling. 4. Batteries in general or battery leakage causing damage to the motor.
- Page 14 The warranty statement detailed here is the sole responsibility that applies to the Company. L.B. Spinner Inc. shall not bear any liability, neither direct and/or indirect, with regards to the product or any of its parts, including any liability for indirect damages and losses of any kind sustained by the buyer or any 3rd party.
- Page 15 For your convenience, a video tutorial is available at YouTube Search for LB Spinner Assembly Visit our website: www.lbspinner.com Follow us on Instagram: Like us on Facebook: #Thelbspinner L.B.Spinner-Portable Rotisserie...