Advertisement
CX-683
An internal view of the machine in the clamping operation.
Arm for synchronizing the move of the left and right side sheet metal levers.
Left side sheet metal lever.
Shutter is opened or closed by the shutter spring that is screw-fixed to the cartridge holder.
2.3 EJECT OPERATION
The cartridge is ejected basically in the reverse order of loading.
Eject position is decided by the eject switch. As this switch is turned off, the loading motor is stopped and thus
the cartridge eject operation is completed.
14
Cartridge holder is driven to the clamping position by move of the sheet metal lever.
Left side fitting pin of the cartridge holder.
Right side sheet metal lever.
Advertisement
