Honda Element 2006 Reference Owner's Manual page 87

Hide thumbs Also See for Element 2006:
Table of Contents

Advertisement

Main Menu
Playing the AM/FM Radio
To Play the Radio
The ignition switch must be in the
ACCESSORY (I) or the ON (II)
position. Turn the system on by
pushing the PWR/VOL knob or the
AM/FM button. Adjust the volume
by turning the same knob.
The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the FM/AM
button. On the FM band, ST will be
displayed if the station is broadcast-
ing in stereo. Stereo reproduction on
AM is not available.
To Select a Station
You can use any of five methods to
find radio stations on the selected
band:
TUNE, SEEK, SCAN,
preset buttons, and
AUTO SELECT
TUNE
Use the TUNE knob to
tune the radio to a desired frequency.
Turn the knob right to tune to a
higher frequency, or left to tune to a
96
Table of Contents
lower frequency.
SEEK
The seek function
searches up and down from the
current frequency to find a station
with a strong signal. To activate it,
press either (
release it.
SCAN
The scan function samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
The system will scan for a station
with a strong signal. When it finds
one, it will stop and play that station
for about 5 seconds (U.S. LX and
Canadian base models) or 10
the
seconds (U.S. EX and Canadian Y
.
package models).
If you do nothing, the system will
then scan for the next strong station
and play it for 5 seconds (U.S. LX
and Canadian base models) or 10
seconds (U.S. EX and Canadian Y
package models). When it plays a
station you want to listen to, press
the SCAN button again.
Preset
or
), then
store one frequency on AM and two
frequencies on FM.
1.
Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each preset
button.
2.
Use the tune, seek, or scan
function to tune the radio to a
desired station.
3.
Pick a preset button, and hold it
until you hear a beep.
4.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
Each preset button can

Advertisement

Table of Contents
loading

Table of Contents