Inter-m ASP-100 Operation Manuals page 9

Web Settings
Web Settings
• Accessing ASP-100 User Interface Web page
- If IP address has not been set, type the default IP address (192.168.1.99) – pushing the factory set switch
more than 5 seconds will result in the unit being reset to default mode.
When connected normally, user verification window will pop-up.
※ Changing password: please refer to the section of '12. password setting'
Type the Default ID and PASSWORD to log in. (Default ID : admin, Password : 1)
※ Caution: It is better to set and use the assigned password for the security purposes.
Please make a note to keep the assigned password.
• Network Settings
Shown above is the network settings page.
The host name is used to identify your unit on LAN - multiple unit is in auto searching mode.
※ IP address : You can set the ASP100 to obtain all network information automatically by setting DHCP
(Dynamic IP address) or can be set as Static IP address.
AUDIO STREAMING PLAYER
ASP-100 7