Related Manuals for HQT DR-9200
Summary of Contents for HQT DR-9200
- Page 1 DR-9200 DIGITAL REPEATER Fujian HQT Communication CO., LTD. All rights reserved to HQT. Pictures shown in this manual are for your reference only, if there is fluctuation, please take the material object as the standard.
- Page 2 HQT endeavors to achieve the accuracy and completeness of this manual. As for any inaccuracies and omissions that may possibly occur, the right to interpret is reserved to Thank you for purchasing HQT DMR digital repeater DR-9200. As a product built to the DMR Fujian HQT Communication CO., LTD.
- Page 3 Software Download More detailed product information To provide downloading of the latest programming software from HQT website. You can connect To deepen your understanding of the functions of this radio. your two-way radio to the computer with a programming cable to manage or edit the parameters of channel frequency and other items.
-
Page 4: Safety Information
Safety Information Please read the following safety guidelines. Nonobservance of these guidelines may cause danger or violation of law. FCC RF EXPOSURE COMPLIANCE REQUIREMENTS FOR OCCUPATIONAL USE ONLY Don’t transmit with antenna detached from the radio or don’t damage or change antenna type. Strong electronic The Federal Communications Commission (FCC), with its action in General Docket 93-62, November 7, 1997, has waves are emitted from the radio and damages or changes to the antenna may effect the performance of the adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC... - Page 5 1.RF Radiation Information FCC Regulations This product must be restricted to operations in an Occupational/Controlled RF exposure Environment. Federal Communication Commission(FCC)requires that all radio communication products should meet the requirements set forth in the above standards before the can be marketed in the U.S, Users must be fully aware of the hazards of the exposure and who are able to exercise control over and the manufacturer shall post a RF label on the product to inform users of operational instructions, their RF exposure to qualify for the higher exposure limits.
-
Page 6: Table Of Contents
Contents Safety Matters ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 03 Repeater Overview ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 11 Front Panel ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 11 ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 04 Product Inspection LED Indicators ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 11 General Installation ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 05 ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 12 Rear Panel Pre-Installation Overview ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 13 Rear Accessory Connectors Environmental Conditions at Intended Installation Site Optional Accessories ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐... -
Page 7: Safety Matters
Safety Matters Product Inspection Please read the rules below. Nonobservance of these rules may cause danger or violation of law. Please unpack carefully and check that all items listed below are received. If any item • The use of this radio must comply with regulations of local government. is missing or damaged, please contact your dealer. -
Page 8: General Installation
• Configure parameters (e.g. Working Frequency, PL, Code, Color Code etc.) of the repeater General Installation based on user's requirements Proper installation can ensure optimum performance and reliability of the HQT repeater and, therefore, Environmental Conditions at Intended Installation Site pre-installation planning is required. This includes considering the mounting location of the equipment The repeater may be installed in any location suitable for electronic communications equipment, in relation to input power and antenna. -
Page 9: Ventilation Requirements
When several cabinets (several repeaters in each cabinet) are installed in a closed area, adequate HQT repeater can be mounted in a rack, bracket or cabinet (So can the accessories). ventilation must be ensured, also to be considered are air condition or other environmental control devices, to meet the operating temperature requirements of the equipment. -
Page 10: Mechanical Installation
Ground cable used for transmitting the current from site circuit or devices belongs to Electrical Grounding. It includes the AC or DC power supply used for site power device, and lines or cables This section introduces mechanical installation steps of HQT repeater. Various mounting methods for connecting site alarm or sensor. -
Page 11: Repeater Overview
Repeater Overview Item Description Tx Connector N Type (Roll Pass) Ground Screw Must be connected to system grounding. Change speed. Stops at room temperature. Main Fan Rotation speed increases when repeater LED Indicators works for a long time. Ethernet Connector 100Base-TX (RJ45) Status Description... -
Page 12: Rear Accessory Connectors
Signal Public Output Address 1 Antenna Duplexer Connector PUB_ADDRESS2 Signal Public Output Address 2 ACC_ID2 External ID Recognition Matrix 2 IGN_SENSE_IN External Sense On Switch Note: Please use HQT approved accessories, or users must bear all the consequences caused by using unauthorized accessories. -
Page 13: Troubleshooting
Troubleshooting Care and Cleaning Phenomena Analysis Solution a. Properly connect the power cord and ensure secure To guarantee optimal performance as well as a long service life of your repeater, please follow the a. Power cord is not connected or is not securely The repeater can not connection. -
Page 14: Service And Support
Note: This warranty will be adjusted or modified properly according to the market, and it is subject to change without notice. If 6. Use the radio only with standard battery, adapter, charger and earphone. adjusted or modified, the warranty is subject to the latest version issued by HQT service center in HQT official channels. -
Page 15: Fcc Caution
=ERP allow actual up to 50% talk. Your Fujian HQT Communication CO.,LTD. Two-way radio complies with the following RF energy exposure standards and guidelines: United States Federal Communications Commission, Code of Federal Regulations; 47CFR §§1.1.307,1.1310, 2.1091 and 2.1093 American National Standards Institute(ANSI)/ Institute of Electrical and Electronic Engineers (IEEE) C95.1-1992...
Need help?
Do you have a question about the DR-9200 and is the answer not in the manual?
Questions and answers