Radio Shack 43-3824 Owner's Manual page 35

   
Choosing between the two outgoing
messages
Press . Then press
OGM
outgoing message is played. This switches
between the prerecorded greeting or the personal
greeting. After finishing playing back the message,
a confirmation tone is heard.
Setting the base ringer volume
You have three ringer options. One allows you to
turn the ringer off. The other two are volume
levels.Ô
1. Press
SET/RING
You hear the ringer at the current volume level
([ ] High, [ ] Low, [ ] off) (if you set the base
ringer volume to off, "Ringer off" is announced)
and it is displayed on the base.
2. Press
SET/RING
appears.
3. The system displayed new ringer volume.
Temporarily Mute the Base Ringer
Press
PLAY/STOP
incoming ring. The ringer will sound with the next
incoming call.
Adjusting the speaker volume level
You can adjust the volume of the base speaker by
pressing the
VOL/SEL/
base. Press
VOL/SEL/
for softer during the base speaker is being used
except for menu mode. Ô
The numbers -
indicating the volume levels.
and being the loudest.
again when the
OGM
.
until the desired ringer option
to temporarily mute the
 or
VOL/SEL/
 for louder or
are displayed on the base
being the softest
 on the

VOL/SEL/
Ô Ô
NOTE
• When you have set the
base ringer to off and the
handset is on the base,
you will still hear the
ringer from the handset.
• When you press

at 9 or
SEL/ VOL/SEL/

at 0, an error tone
sounds.
VOL/
35