Table of Contents
Advertisement
Quick Links
BSR100D™
Wireless VHF / UHF
ISRAEL Office:
Email: info@kpsystems.com
P.O. Box 42, Tefen Industrial Park, Tefen 24959
Tel: 972-4-987-3066 / Fax: 972-4-987-3692
P.N: Book 087
Radio Modem
User Manual
Web Site:
USA Office: KP ELECTRONICS INC.
Email: info@kpelectronics.com
109 Tudor Drive, North Wales, PA 19454
Tel: (215) 542-7460 / Fax: (215) 542-7461
www.kpsystems.com
Rev: New
Approved: Moshe Z. 22/05/03
Advertisement
Table of Contents
Summary of Contents for KP Electronic Systems BSR100D
- Page 1 BSR100D™ Wireless VHF / UHF Radio Modem User Manual ISRAEL Office: USA Office: KP ELECTRONICS INC. Email: info@kpsystems.com Email: info@kpelectronics.com P.O. Box 42, Tefen Industrial Park, Tefen 24959 109 Tudor Drive, North Wales, PA 19454 Tel: 972-4-987-3066 / Fax: 972-4-987-3692...
-
Page 2: Table Of Contents
SETTING COMMUNICATION PARAMETERS ..........BSR100D™ R GUP10™ ADIO ROGRAMMING UIDE SING ....5.1.1 Operating Instructions ............. 5.1.2 Connecting BSR100D to Gup10 ........5.1.3 Loading Parameter Values ..........5.1.4 Changing Parameter Values .......... BSR100D™ Wireless Radio Modem Page 2 User Manual... - Page 3 5.2.1 Preparing Programming ..........5.2.2 COM Port Settings ............5.2.3 COM Port Parameters ............. 5.2.4 Primary and Secondary Port Settings Communications Modes ..5.2.5 Port Statistics ..............TECHNICAL SPECIFICATIONS ................BSR100D™ Wireless Radio Modem Page 3 User Manual...
-
Page 4: General Description
1 General Description The BSR100D is a data radio modem unit designed for high performance, long- range SCADA (Supervisory Control and Data Acquisition) and telemetry applications. The BSR100D offers the advantage of distanced communications using long-range VHF and UHF frequencies with data modem. -
Page 5: Rear Panel Display
DC power is applied 1.3 Rear Panel Display The back panel includes cable connection for Tx/Rx mode with an optional Rx plug, a 15-pin control connector and power outlet. Figure 2: Rear Panel Display BSR100D™ Wireless Radio Modem Page 5 User Manual... -
Page 6: Radio Module Description
The BSR100D™ has four sets of radio connectors in the rear of the unit: J1, J2, J3, J6 (see Figure 3: Radio Connectors J1, J2, J3 & J6 and Table 2: Radio Connector Description for full explanation). -
Page 7: Modem Module Description
3 Modem Module Description The BSR100D has a built-in wireless modem that provides a high-speed data link suitable for a wide variety of applications with system security for diagnostics reporting. 3.1 Data Port Interface The BSR100D modem component is equipped with a J4 15-pin data port interface. - Page 8 Receive data from BSR100D to DTE TX Data Transmit data from DTE to BSR100D Asserted when the BSR100D is ready to accept TX data Causes the BSR100D to transmit when asserted by the DTE Asserted by the BSR100D when a data signal is being received BSR100D™...
- Page 9 Data Terminal Ready. Asserted by the BSR100D Field Programming Software to select set-up mode (Don’t connect to this pin for user application) Test Audio Output signal used during adjustment and testing RSSI Output signal used during testing BSR100D™ Wireless Radio Modem...
-
Page 10: Preparing For Operation
4 Preparing for Operation Before installing the BSR100D™, it is suggested that the following preparations are performed: • Connecting assembly cables • Connecting PC to Modem Module DTE • Connecting power supply • Performing a self test 4.1 RF exposure statement Power listed is Conducted. -
Page 11: Connecting Power Supply
Table 6: Self-Test LEDs LED Indicator Status LED PTT ON (red) Tx mode Rx mode 2 Flashes Overload (optional) 3 Flashes Predriver/Driver 1 Flash Time out timer 4 Flashes 4 Flashes Synthesizer BSR100D™ Wireless Radio Modem Page 11 User Manual... - Page 12 Channel Monitor Flashes red/-green RF/IF Amplifiers In addition to the signals in Table 6: Self-Test LEDs, there is an error-status word in the Gup10™ Utility Program (see following Section 5 Setting Communication Parameters) BSR100D™ Wireless Radio Modem Page 12 User Manual...
-
Page 13: Setting Communication Parameters
• Transmit frequency (MHz) • Receiver frequency (MHz) • Tx time out (0-240 sec) Connecting RADIO SET-UP cable using KP’s RS232 adaptor (RSINT001™) are configured between the BSR100D and a PC (see Figure 9: BSR100D/PC Connection Configuration). Figure 9: BSR100D/PC Connection Configuration 5.1.1 Operating Instructions •... - Page 14 • Click No, to return to the Gup10 main screen without updating changes 5.1.6 Confirming Parameter Changes Ensure that any parameter value changes made are updated. To confirm parameter changes click Read (Alt R) from the BSR100D™ Wireless Radio Modem Page 14 User Manual...
- Page 15 Gup10 main screen. The Gup10 main screen displays the updated parameter values. BSR100D™ Wireless Radio Modem Page 15 User Manual...
- Page 16 BSR100D Radio Modem. The DFP software allows the user to edit and program user programmable settings, interactively tune modem, and monitor diagnostic data from the BSR100D (See Figure 11: DFP Software Startup Screen). Figure 11: DFP Software Startup Screen This manual assumes the DFP software has been installed on the user’s PC...
- Page 17 Primary and secondary COM ports are configured with the DFP software. The programming cable is connected from the set-up port on the BSR100D to the PC’s COM port configured as the primary port. The Port Setting Screen of the FPS is accessed via the Utilities pull-down menu (see Figure 12: DFP Software Port Setting Screens).
- Page 18 Data Bits Selects the number of data bits (4-8) transmitted or received for the primary and secondary COM ports BSR100D™ Wireless Radio Modem Page 18 User Manual...
- Page 19 COM port setting to the primary COM port (and moves the primary COM port to the secondary settings). Since the BSR100D programming is done through the primary COM port, this is useful when two units are connected to the primary and secondary COM ports. A swap COM port allows the second unit to be programmed without switching programming cables.
- Page 20 Bytes Rx’ed shows the number of bytes (characters) received since the port was last open or cleared. Framing Errors Framing Errors shows the number of farming errors received since the port was last open or cleared. BSR100D™ Wireless Radio Modem Page 20 User Manual...
- Page 21 Dribble Bytes Dribble Bytes shows the number of extra (not expected) bytes (characters) received since the port was last open or cleared. BSR100D™ Wireless Radio Modem Page 21 User Manual...
- Page 22 Asynchronous, serial, transparent Word Length 7 or 8 bit words, 1 or 2 stop bits Parity Even, odd, or none Handshake RTS-CTS RTS/CTS Delay 15 msec Diagnostics Power, TX RX, internal temp BSR100D™ Wireless Radio Modem Page 22 User Manual...
- Page 23 Physical Dimension Size 169x150x44 mm ( 6.6”x5.9”x1.7) Weight 0.65 Kg (1.44 Lbs) BSR100D™ Wireless Radio Modem Page 23 User Manual...
Need help?
Do you have a question about the BSR100D and is the answer not in the manual?
Questions and answers