Setting The Language; Memory Dialing - Radio Shack 43-3557 Owner's Manual

• If you are not sure of your dialing
system, set for tone dialing. Make a
trial call.
If the call connects, leave the setting
as is, otherwise set for pulse dialing.
• If your phone system requires pulse
dialing and you need to send the
DTMF tones for certain situations
during a call, you may "switch-over"
to tone dialing. (Refer to "Tone
Dialing Switch-over" on page 15.)

Setting the Language

1. When the phone is in the standby
mode, press and hold
2. Press
VOL
Language
¨
3. Press
SELECT
Fr. Esp
¨ ¨ and ¨
4. Press or return the handset to the
END
base unit to complete the setting. The
handset returns to the standby mode.

MEMORY DIALING

S P
TORING HONE
N
AND AMES
Memory Dialing allows you to dial a number
using just a few key presses. Your cordless
telephone stores up to ten names/numbers
in the handset. Ô
1. Press , ¨
MEM
displayed.
2. Press
VOL
number ( -
0
location where you would like to store
the number.
.
CID
key four times to select
¨.
to toggle between ¨
¨ for each setting.
N
UMBERS
Select Memory
or keys, or enter a
VOL
) to select the memory
9
Eng
¨,
In memory dialing
operation, you must press
a key within 30 seconds or
the phone will return to the
standby mode. If you
return the handset to the
¨ is
base, the phone will return
to the standby mode also.
Ô Ô
NOTE
19