Page 2
CAUTION Read Rules for Safe Operation and Instructions Carefully. WARNING 1. To reduce the risk of fire or electrical shock, do not use this fan with any solid- state speed control device. 2. If the power cord is damaged, it is strongly recommended to request a specialist to handle.
Page 3
ROUND BASE & COLUMN UNIT ASSEMBLY 1. Unpack the packing box and check the parts by referring to the part figure. Take out 4 sets of screw from the screw bag attached to the round base. 2. Set the column and align the screw holes.(See Fig.1) 3.
Page 4
OPERATING INSTRUCTION 1. Speed control Speed is controlled by knob switch. 0--Off 1--Low 2--Medium 3--High 2. Clutch knob Press down this knob to oscillate the fan. To choose one direction, pull up this knob when the fan is in the desired direction.
Need help?
Do you have a question about the FS40-8M and is the answer not in the manual?
Questions and answers