Using The Cord Clip; Operation; Making And Receiving Calls; Changing Channels - Radio Shack 43-3522 Owner's Manual

Using the Cord Clip

Insert the cord into the cord clip's
hook, then attach the cord clip to your
lapel or shirt to position the cord.

OPERATION

Making And Receiving Calls

Before using the phone, put the
headset on and adjust it as needed.
To make a call, lift the remote keypad,
then press
TALK/HANG UP
dial tone, the TALK/LOW BATT
indicator and the IN USE/CHARGE
indicator. Dial the desired number.
To answer a call, lift the remote
keypad, then press
TALK/HANG UP
The TALK/LOW BATT indicator and IN
USE/CHARGE indicator.
To disconnect a call, press
or place the remote keypad on the
UP
base.
Notes:
• When you press a button, a single
tone indicates that the phone has
accepted the command. Three
tones indicate that you pressed a
button in error or there is severe
interference. If there is severe
interference, move the remote
keypad closer to the base before
you press any key.
• If the interference is severe, the
remote keypad might lose
communication with the base and
the call might be disconnect. If this
happens, return the remote
keypad to the base for about 5
seconds to reset the security
access-protection code.

Changing Channels

Your phone has an Auto Scan feature
that automatically selects a clear
channel when you press
. If you experience interference
UP
during a call, press
to another channel until you have good
. You hear a
reception.

Setting the Volume

To adjust the volume, lift the remote
.
keypad, press
repeatedly press
There are four levels. The phone
beeps 3 times when you reach the
TALK/HANG
lowest or highest level. The volume
level remains set after you hang up.

Using Redial

To quickly redial the last number
dialed, lift the remote keypad, press
TALK/HANG UP
To redial a busy number, press
REDIAL/PAUSE
phone to the base.
Notes:
• The redial memory holds up to 32
digits, so you can redial long-
distance as well as local numbers.
8
TALK/HANG
to switch
CHANNEL
. Then
TALK/HANG UP
8 8 8 8 9 9 9 9
or .
VOLUME
then .
REDIAL/PAUSE
without returning the