Temporary Tone Dialing; Redial; Find Handset - Radio Shack 43-324 User Manual

Temporary Tone Dialing

If you have pulse (rotary) service, you can change from pulse to touch tone
dialing during a call by pressing TONE*. This is useful if you need to send
touch tone signals to access telephone banking or long distance services.
Once you have initiated your call by dialing the phone number in pulse
(rotary), press TONE*. Now, all subsequent key presses are sent as touch
tone signals.
After you hang up, the phone returns to pulse (rotary) dialing for the next call.

Redial

The telephone stores the five most recently dialed telephone numbers in
the redial list. When the list is full, the oldest entry is deleted to make room
for the new entry.
1. Press REDIAL/PAUSE, then press , , or REDIAL/PAUSE repeatedly
to review the redial list. Press CHAN/REMOVE to delete the displayed
number.
2. Press /FLASH, then press REDIAL/PAUSE to dial the last telephone
number dialed.
-OR-
• Press REDIAL/PAUSE, then press , , or REDIAL/PAUSE repeatedly
until the desired entry displays, then press
number.

Find Handset

Press FIND HANDSET on the telephone base to locate the handset and
the handset is not placed in the telephone base. The handset rings and
**PAGING** will be displayed on its screen.
• Press FIND HANDSET again or put the handset back on the telephone
base to stop the paging tone.
-OR-
• Press OFF on the handset to stop the paging tone on the selected
handset.
/FLASH to dial the
15