CONTENTS 1. WHAT IS INCLUDED? ...................... 3 2. HOW TO START? ........................ 4 3. HOW TO USE?........................ 6 a. How to wear? ....................... 6 b. T ime Display ........................ 7 c. D istance/Steps Display .................... 7 d. ...
Installation guide Free Star.21 APP This app can support the system and mobiles as below , a. FOR IOS iPhone 4S and above iPod TOUCH 5 GEN and above iPad 3 GEN and abo e iPad MINI b. FOR ANDROID (Available after JUNE,2014) NEXUS 4 and 5 GALAXY S4 and above GALAYXY NOTE3 and above 2. HOW TO START? a. Install the Star.21 ,after downloading “STAR.21” on the APP Store or Goog l e Play (Ava lable after JUNE,2014) APP ICON ...
Page 5
2) Connecting Turn on your Bluetooth 4.0 function on your mobile phone. Launch the app and follow the instructions on screen to connect to the Star Band. Next, tap on the connecting icon to discover the Star Band (e.g. HB1001‐E30DC), then select to connect t o it. Once connected successfully, the icon in the app will flash as in PIC 2, and the color of the connecting icon will change from gray to blue. Unconnected PIC 2 Connected PIC 3 ...
3. HOW TO USE? a. How to wear? i. Put the Star Band on your wrist with the adjustment holes in the strap facing you. ii. Feed the button through the loop, and adjust the bel till it fits sn u u gly on your wrist. iii. Push the button into the hole to fasten the Star Band to your wrist. PIC 5 Suggestions: 1. Please do not over tighten the strap on your wrist; it may make yo ...
b. Time Display The Star Band can display the local time on its LED face. Depress once on th e button to read the time from its LED face. It is synchronized with the time on your mobile d e vice. The accuracy of the time displayed is ± 2.5 minutes. M i nutes LED blin ks LED illuminate d Hours L ED illuminates PIC 6‐3 PIC 6‐1 P IC 6‐2 c. Distance/Steps Display ...
e. Sleep Depress the function button and hold (about 3 seconds) till the red LED on b o th sides illuminate and blinks 3 times. Immediately let go of the button once this mo d e activates. This will bring the Star Band to sleep mode. If you continue to depress the button, it will return to standard day time mo d e. If you continue to depress for about 8 seconds or more, the Star Band will t u rn off. Sleep m Time ode Depress the bu tton till the re d PIC 9‐ 3 PIC 9‐1 LED illuminate s and blink 3 times to switch to sleep mode ...
h. Turn off Depress and hold the function button for about 8 seconds or more. The LE D s will illuminate in the sequences as shown in PIC 12‐1, before turning off. PIC 13‐1 PIC 13‐2 PIC 1 3‐3 i. Reset Depress and hold on the function button for about 13 seconds till the LEDs blinks 3 times as in (PIC 13‐1). Note: When you reset the Star Band, the memory in the Star Band will be cl e ared. Please backup the data before you reset. j. Memory The Star Band records up to seven days of your activities, including one day detailed data, and 6 days of summarized data. So it’s best to sync Star Band to the mobile phone app regularly to ensure daily detailed data are uploaded. k. Online upgrade New version of the Star Band firmware will be notified under the “upgrade f i rmware” option in the main menu of the app. The system will check for different version number and prompt to upgrade i f a new firmware is available. Click the new firmware to launch the online upgrade menu. ...
Page 11
15 seconds till the the top and bottom LEDs illuminate. Then release th e button, and wait for the app to retrieve the band name and display on the menu. PIC 14‐3 vi. Confirm and upgrade:click on the band name to confirm to upgrade. The LED in the middle will blink till the upgrade is completed. PIC 14‐4 vii. Upgrade completed:Once the upgrade is completed; it will display th e message as in PIC 14‐5. If the upgrade fails as in PIC 14‐6, please retry again. The Star Band will remain in the upgrade mode till the upgrade is completed. ...
Page 12
Warranty and Service If at any time within one (1) year from the purchase date of this product, it fails to perform properly because of defect(s) in material or manufacturing, return it prepaid to: Block B, 3F, JiaDa R&D Building, 5 SongPingShan Road, Nanshan District, Shenzhen, China, 518057 Complete this Guarantee Certificate and enclose it (or a copy of it) with the product. (PLEASE PRINT CLEARLY) ...
Page 13
FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.