Radio Shack Cordless Room Monitor Owner's Manual page 9

43-489rc.fm Page 9 Tuesday, October 3, 2000 10:12 AM
1. Remove the battery compartment cover on the back of the
receiver by inserting a flat-blade screwdriver into the notch
on the cover, then lifting off the cover.
Belt Clip
POWER ON/
VOLUME
2. Remove the battery from the compartment.
3. Plug the battery's plastic connector into the socket in the
battery compartment. The plug fits only one way.
4. Place the battery back inside the compartment.
5. Replace the cover.
6. Insert the supplied adapter's barrel plug into the charger's
jack.
DC 9V
Caution: The supplied RadioShack adapter was designed
specifically for your room monitor. Use only the supplied
adapter.
7. Plug the adapter's AC plug into a standard AC outlet.
8. To mount the charger on a wall see "Mounting the Charger
on a Wall" on Page 11.
CHANNEL 1 – 2
Preparation
9