Advertisement
Before installing the handle:
1, Open the package of the product, please find the Manual & Accessories package in the inner basket. The
parts should include the following: one handle, one handle cover, two keys and four screws. In case any parts
missing, please contact with your seller for replacement.
2, Tools needed: a cross point screwdriver. A pair of protection gloves.
Installation Process:
1, Please put on your gloves before the installation to avoid unexpected injury.
2, Please place the handle on the front side of the door evenly, where the handle fit all mounting holes perfectly.
3, Please hold the handle firmly and fixing the first screw on the left, then fix another one on the right in the same
way. And you can fix the rest screws one by one. Please check if all screws fixed firmly.
4, Please bend the handle cover and insert the both sides of it into the handle carefully.
Then push the central part of the cover with your both hands evenly, if necessary, knock on it slightly, till the
cover is well jointed on to the handle.
5, At last, please close the door and make sure the lock is operational with the keys.
Please read this manual carefully
3
5
4
Advertisement
