Page 2
SCOTTY and its suppliers retain all copyright and other intellectual property rights in the software embedded in and associated with the product described in the documentation (the Software).
3.7 Communication Box Connections ..............12 3.8 Status LEDs ......................12 3.9 Setting up the Gooseneck Microphone ............. 13 3.10 Starting the SCOTTY Mobile HD ..............13 3.11 Microphone Selection ..................13 3.12 Software Configuration ................... 14 3.13 Turning Off the System ..................14 4 Maintenance ..................
Page 4
SCOTTY Mobile HD Equipment Manual 6.8 Rechargeable Battery ..................25 6.8.1 Battery Operation Time ................25 6.8.2 Battery Charge Time ................. 25 6.8.3 Battery Discharge Time (Battery life) ............25 7 Connectors and Pin-Outs ............... 27 7.1 Notebook Interfaces ..................27 7.2 Communication Box Interfaces .................
Welcome to the world of advanced communication... welcome to the world of SCOTTY! SCOTTY provides a unique offering of live HD video, audio, and data communication, live HD video surveillance transmission, and imagery transfer from air, land, and sea – over satellite and terrestrial networks. This package is...
Furthermore, Quick Reference Guides are available describing the basic functionality on a single page – these are suitable for daily use. Details about the notebook used as part of the SCOTTY Mobile HD are covered by a separate set of documentation. This documentation is installed on the notebook itself and available through the SCOTTY Teleport Manual menu.
SCOTTY Mobile HD Equipment Manual 2 Introduction 2.1 Scope This document covers the specifications, including interface control, usage and maintenance of the following component: SD208555A SCOTTY Mobile HD and variants The SCOTTY Mobile HD The system uses a ruggedized notebook placed on a high performance communication box located underneath.
The SCOTTY Mobile HD is based on a rugged 15.6” notebook providing PC interfaces like LAN and USB. An internal solid state disk is used for the operating software –...
To set a new combination: 3.2 System Components The SCOTTY Mobile HD is based on a rugged 15.6” notebook employing a full HD (1920x1080) sunlight readable display. The notebook sits on the SCOTTY communication box containing the communication system and the power supply.
For replacing the batteries see chapter Maintenance. 3.6 Network Connection The notebook Gigabit LAN interface is used to connect the system to the network. By default, the SCOTTY Mobile HD uses DHCP and will setup the network address automatically. LAN interface connector All rights reserved.
SCOTTY Mobile HD Equipment Manual 3.7 Communication Box Connections The notebook provides “typical” computer interfaces like USB 3.0. The communication box allows flexible use of external video and audio equipment. For details, see chapter Connectors and Pin-Outs. 3.8 Status LEDs Three LED’s on the left side of the unit provide information on the...
For transport the microphone is stored in the front of communication box, for operation it is plugged into the “Mic” connector on the back right side of the SCOTTY Mobile HD. Gooseneck microphone stowed for transport / installed for operation 3.10 Starting the SCOTTY Mobile HD...
For more details, please refer to the Software Manual. 3.12 Software Configuration To allow optimal operation, the software settings of the SCOTTY Mobile HD need to match the equipment used. Therefore, especially the codec audio and video settings in the...
4 Maintenance 4.1 Installing and Removing the Notebook The SCOTTY Mobile HD is based on a rugged 15.6” notebook. This notebook can easily be removed from the communication box by disconnecting the data, the power and the camera connectors and loosen two knurled thumb screws on the rear side of the notebook.
The batteries were tested for safety and have worldwide approvals: The batteries are registered with recycling systems worldwide. For more details please consult: http://www.rrc-ps.de/en/products/battery-packs/standard-battery- packs/rrc2024/features.html A replacement battery can be ordered at SCOTTY: Li-Ion battery pack RRC2024 14.4V 95Wh EK, part number: SD208575A All rights reserved.
The notebook employs an 11.1V, 6040mAh lithium ion battery pack (Type: BRSB3A). For more information on replacing this battery please consult the notebook documentation, available through the SCOTTY Teleport Manual menu. Battery Disposal & Caution: Recycle batteries according to national and local regulations. Contact your local representative for assistance.
Page 18
SCOTTY Mobile HD Equipment Manual This page intentionally left blank. All rights reserved.
SCOTTY Mobile HD Equipment Manual 5 Physical Specifications Built into a water tight, crush and dust proof carrying case, the system uses a ruggedized notebook connected to the high performance communication box located underneath. 5.1 Weight and Dimensions, closed (for transport)
SCOTTY Mobile HD Equipment Manual 5.3 Outline Drawings In the following drawings, dimensions are in mm; drawings not to scale. Mobile HD dimensions closed (for transport) Mobile HD dimensions opened (for operation) All rights reserved.
SCOTTY Mobile HD Equipment Manual 6 Electrical Interfaces 6.1 Overview The SCOTTY Mobile HD provides a rich set of interfaces LAN 10M/100M/1G Notebook USB 3.0 USB 3.0 Data Camera Communication Box Headset Line Out Audio/Video System Line In CVBS In...
SCOTTY Mobile HD Equipment Manual 6.2 Hardware Specification For detailed specification data of the notebook please consult the corresponding manual. The communication box employs a power supply, a high capacity rechargeable battery, a system controller to monitor operation conditions and a high performance audio- and video subsystem based on a video processing DSP with hardware accelerated encoding and decoding features.
SCOTTY Mobile HD Equipment Manual 6.5 Audio Interfaces Several analog audio inputs and outputs are available. The inputs allow a very wide input level range to directly support microphones, line and other signal levels. Headset Input: Phantom power 3.3V over 2.2kOhm Input range -63.5dBV …...
SCOTTY Mobile HD Equipment Manual Line Out Output range -51.5dBV …. 11.2dBV (3.6Vrms) Output resistance 10 Ohm Configurable as one mono or one stereo codec output Configurable to connect a speaker (line mode) or a monitoring device (aux mode) 6.6 Notebook Interfaces...
SCOTTY Mobile HD Equipment Manual 6.8 Rechargeable Battery When no mains power is available, operation is possible based on the built in rechargeable batteries. The notebook is then powered using its internal battery, whereas the communication box uses its built in battery.
Page 26
SCOTTY Mobile HD Equipment Manual This page intentionally left blank. All rights reserved.
SCOTTY Mobile HD Equipment Manual 7 Connectors and Pin-Outs 7.1 Notebook Interfaces On the left side, the notebook provides two USB 3.0 ports, an SD card slot supporting SD/SDHC/SDXC/UHS-I and a SIM card slot. Left side notebook view Right side notebook view For details see the notebook documentation.
SCOTTY Mobile HD Equipment Manual 7.2 Communication Box Interfaces The SCOTTY Mobile HD interfaces are accessed via several connectors located at the right side of the unit. The AC power connector is located on the left side. Two cables are employed to connect the notebook with the communication box.
SCOTTY Mobile HD Equipment Manual 7.3 Headset Mobile HD: 3way Jack Socket 6.35mm Cable: 3way Jack Plug 6.35mm Name Signal Description AI21_AN_P Headset Mic, Pwr 3.3V Headset AO21_AN Headset Speaker AO21_AN_GND 7.4 Line Out Mobile HD: 3way Jack Socket 6.35mm Cable: 3way Jack Plug 6.35mm...
SCOTTY Mobile HD Equipment Manual 7.7 HDMI/DVI/VGA Out Type: DVI connector, standard DVI pinout Name Signal Description VO10_HDMI_D2_N Data 2- VO10_HDMI_D2_P Data 2+ Shield Data 2 not connected not connected VO10_HDMI_DDCCLK DDC SCL VO10_HDMI_DDCDAT DDC SDA VO10_HDMI_D1_N Data 1- VO10_HDMI_D1_P...
SCOTTY Mobile HD Equipment Manual 7.8 HDMI/DVI/VGA In Type: DVI connector, standard DVI pinout Name Signal Description VI10_HDMI_D2_N Data 2- VI10_HDMI_D2_P Data 2+ VI10_HDMI_SHLD Shield Data 2 not connected not connected VI10_HDMI_DDCCLK DDC SCL VI10_HDMI_DDCDAT DDC SDA VI10_HDMI_D1_N Data 1-...
SCOTTY Mobile HD Equipment Manual 7.9 COM4 Mobile HD: 9way, D-sub, male Cable: 9way, D-sub, female Name Signal Description do not connect COM_RXD Received data (RS422:RX+) RS232 COM_TXD Transmit data (RS422: TX-) Optional: RS422 COM_12V +12V / 1.2A Out COM_GND...
SCOTTY Mobile HD Equipment Manual 7.11 Camera Mobile HD: 7W2, D-sub, female Cable: 7W2, D-sub, male Name Signal Description AI22_AN_P Cam Mic, Pwr 3.3V Camera Mic In SDI_IN SDI in SDI Input SER1_GND Codec SER1_RXD Received data RS232 SER1_TXD Transmit data...
Page 34
SCOTTY Mobile HD Equipment Manual This page intentionally left blank. All rights reserved.
This chapter is intended to give a non-exhaustive overview of the possibilities of the SCOTTY Mobile HD hardware and software. Please note that some of the optional features may become standard by a future software update.
Need help?
Do you have a question about the SD208555A and is the answer not in the manual?
Questions and answers