Radio Shack 63-969 Owner's Manual page 6

63-969.fm Page 6 Monday, September 27, 1999 9:19 AM
Caution: You must use a Class 2 power source
!
that supplies 3 volts DC and delivers at least
200 mA. Its center tip must be set to positive
and its plug must fit the clock's
adapter meets these specifications. Using an adapter
that does not meet these specifications could damage
the clock or the adapter.
Follow these steps to connect the AC adapter to the
clock.
1. Slide the battery compartment cover in the direction
of the arrow to remove it.
2. Plug the AC adapter's tip into the jack inside the bat-
tery compartment.
3. Route the adapter's cord through the slot marked
on the back of the clock.
3V
4. Replace the cover.
5. Plug the AC adapter's other end into a standard AC
outlet.
6
jack. The supplied
DC 3V
DC