Lever - Bushranger X-16 Operator's Manual

BUSHRANGER
TM
ATTENTION
 Be careful when taking the sprayer out of the
carton because the lever is loose and can
cause damage.
INSTALLING THE SHAFT
 Introduce the shaft (1) in the free opening on the tank base
(on the same side of the chamber). Fit the shaft lock (2).
Shaft lock (2)
INSTALLING THE LEVER
Lightly grease the orifice on the top of the chamber.

Fit a flat washer on the shaft and rod.

For easy assembly, install the lever on the shaft and the rod on the

chamber top at the same time.
Install the other flat washers on the shaft and rod and lock

with the locked ring.
X-16
Shaft (1)
COMMERCIAL SERIES
5/24