ASSEMBLY INSTRUCTIONS
Step 3: Attach upper collecting tube (L) to left leg (J) and right leg (K) with M6*55 bolts (O), and
M6 nut (S) as shown above. Do not overtighten the bolts.
Step 4: Attach left armrest (B) and right armrest (A) to swing pole (D) with M6*45 bolt (N), Plastic
washer (T), steel washer (R) and M6 nut (S) as shown above. Do not tighten the bolts.
* Repeat from step 1 to step 4 to assemble the other glider chair.
7