Summary of Contents for Jumper JPD-700A
-
Page 1: User Manual
Bluetooth Weight Scale JPD-700A User Manual Shenzhen Jumper Medical Equipment Co., Ltd. ● Please read this User Manual carefully before using the product. Date of compilation: April 2017 Version: A/0... - Page 2 This product helps users to develop good habits for diet management and exercise for the purposes of managing their weight. Jumper reserves the copyright for this User Manual and no extraction or copying of the content herein is permitted without approval.
-
Page 3: Table Of Contents
Contents FCC Statement..............1 Quick Use................2 Product Structural Components and Display…….………3 Unit Conversion..............4 Instructions for Use............5-11 FAQs on Weight Measurement.........12 Troubleshooting..............13 Safety Caution…….….............14 Description of Marks and Symbols........15 Cleaning and Maintenance..........16 Technical Specifications..........17-18... -
Page 4: Fcc Statement
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Notes: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. -
Page 5: Quick Use
Quick Use Using the scale alone 1. Place the scale on a hard and flat surface. Gently step on it and wait until it turns on when the LED displays digits. Then step off the scale and stand back on in an upright and steady position when the LED displays zero. -
Page 6: Product Structural Components And Display
Product Structural Components and Display 1. Product Structural Components LED Display Sensor Measuring Surface Battery Cover 2. Display Interface Digital display Bluetooth 斤 lb kg Weight units - 3 -... -
Page 7: Unit Conversion
Unit Conversion Converting Weight Units The factory default unit is kg. For unit conversion, open the battery cover at the back with the power off and adjust the gear toggle switch. The units available are kg, lb and jin (500g) from left to right. When the switch is placed at one of the gears, the displayed unit automatically switches to the corresponding weight unit after the scale is turned on. -
Page 8: Instructions For Use
Scan the QR code to download and install the mobile client software: Android and ios users can scan the QR code on the product package or this page to download “JUMPER Health” and install it as instructed. - 5 -... - Page 9 Instructions for Use 3. User registration and login Open “JUMPER Health”, complete the user registration, and login as instructed. Enter your nickname, gender, date of birth and height as instructed. - 6 -...
- Page 10 Instructions for Use 4. Enter the Monitoring Page After the registration and login, click “Detection” at the bottom of the page, and then choose “Weight” to enter the weight monitoring module. - 7 -...
- Page 11 Instructions for Use 5. Bluetooth connection Turn on mobile Bluetooth after receiving the prompt in the weight monitoring module and then stand on the scale. When the data stabilizes, your mobile phone will display the measured data. This means that the Bluetooth connection has been made and the measurement can be carried out.
- Page 12 Please fill in accurate information to ensure the accuracy of the measurement. ※ “JUMPER Health” supports IOS 7.0 and later, Android 4.3.4 and later. These can be downloaded at APP markets such as APP STORE and Google Play for those smart phones, which should also be able to support Bluetooth 4.0 as well.
- Page 13 Instructions for Use 6. Standing on the scale for measurement Stand on the scale surface to measure your weight. The measured data will automatically display on the mobile phone and your BMI will automatically be calculated based on your height and weight.
- Page 14 Instructions for Use 7. Checking the record Check the record by clicking“Record”. The daily measured data is automatically recorded in the tendency chart so users may check their weight anytime. - 11 -...
-
Page 15: Faqs On Weight Measurement
FAQs in Measuring Weight Question: Why is there some deviation between the weight measurements every time? Answer: Every time the scale turns on, it will automatically conduct a zero calibration procedure as the scale has its own weight. There will be some deviation when the scale is relocated or placed on uneven ground or when the user stands in different positions on the scale. -
Page 16: Troubleshooting
Troubleshooting Error Cause Solution Check to see if the Incorrect installation poles of the batteries of batteries correctly installed The batteries have Replace with three run out of power new AAA batteries The LED display is Press the scale and not on or the scale The weight being measure... -
Page 17: Safety Caution
Safety Caution Caution 1. Do not use the product in a slippery place, like floors with smooth tiles or a wet and slippery floor 2. Do not stand on the edge of the product or jump on it 3. Do not stand on the product when your body is wet 4. -
Page 18: Description Of Marks And Symbols
Description of Marks and Signs Sign Description Attention! Refer to the user manual. Waste electrical materials should be sent to a dedicated collection point for recycling. Bluetooth Recyclable Environmentally-friendly use period of 10 years - 15 -... -
Page 19: Cleaning And Maintenance
Cleaning and Maintenance Cleaning 1. Please use a soft, dry cloth to clean the instrument and prevent internal water seepage. Never use any chemical detergents. 2. Wipe the scale’s surface with a soft cloth or tissue; wipe the scale’s body with a soft cloth wrung-out after being dipped in water or neutral detergent, and then wipe it dry with a dry cloth. -
Page 20: Technical Specifications
Technical Specifications Technical Specifications 1. Accepted weight range: 3 kg-180 kg 2. Division value: 0.1kg 3. Accuracy: ±0.2kg 4. Weight unit: jin, lb, kg 5. Display: LED display 6. Sensor: four precision weight sensors 7. Auto power on when the scale is stepped-on, with a minimum weight of 4.5kg for turning it on, and auto power off in 10s with no measurement 8. -
Page 21: Technical Specifications
Technical Specifications 14. Bluetooth Technical Parameters Frequency Range 2402-2480MHz Modulation Type GFSK ≤20ppm Frequency Tolerance Number of channel 40CH Ｒｅｆｅｒ ｔｏ ＥＮ ３００３２８ Spurious Emission Limit - 18 -... - Page 22 The device complies with EU EMF Directive 1999/519/EC can be used in the European Community. “Hereby, (Shenzhen Jumper Medical Equipment Co.,Ltd. ) declares that this (Model: JPD-700A ) is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.”...
- Page 23 (excluding its handset) and users. Product Name: Bluetooth Weight Scale FCC ID：2ADYL-JPD700A Manufacturer: Shenzhen Jumper Medical Equipment Co., Ltd. Address: D Building, No. 71, Xintian Road, Fuyong Street, Baoan, Shenzhen, Guangdong, China Tel: +86-755-26696279 Fax: +86-755-26852025 Website: http://www.jumper-medical.com...
Need help?
Do you have a question about the JPD-700A and is the answer not in the manual?
Questions and answers