Download Print this page

Technical Specification; Safety Rules; Service And Support - QCY QY8 User Manual

Hide thumbs Also See for QY8:

Advertisement

Warning:
You Must select a qualified charger .from a regular manufacturer .
You Must charge the bluetooth headphone If it has been not used for more than
12 momths .

Technical specification

Bluetooth Specification:4.1+EDR
Bluetooth Profile: HFP1.6,HSP1.2,AVRCP1.4,A2DP1.2
RF Range:10m
Noise reduction:CVC6.0
Stand-by time: about 175 hours
Calculating Conversation Time: about 5 hours
Charging time: About 2 hours
Dimension (L×W×H):40×24×32mm
Weight : 16.4g
FAQ
Q: Why can not turn the headset on?
A: Make sure your device is fully charged before using it for the first time. Your
device can not be turned on if battery level is very low.
Q: There is no sound when playback?
A: Check the connection between your device with phone or computer, if the
connection is not established, please reconnect again. And adjust the volume
level to a suitable level.
Q: Phone or computer can't find your device?
A: Check the Bluetooth is "visible" in your phone or computer, if pair timeout,
pairing mode will exit, please re-enter pairing mode. If your phone application
have some problems, please re-start the phone. If your device has problem,
re-start or reset it.
11

Safety Rules

1)Never disassemble or modify your headset for any reason.
Doing this may cause the headset to malfunction or become
combustible. These damage to your device can void your
manufacturer's warranty.
2)Do not allow your device to get wet, liquids can cause serious
damage. Water damage to your device can void your
manufacturer's warranty.
3)Avoid exposing your device to very cold or very hot
temperatures(below 0℃ or above 45℃). Extreme temperatures
can cause the deformation of the device and reduce the charging
capacity and life of your device.
4)Avoid using your device's light close to the eyes of children or
animals.
5)Do not use the device during a thunderstorm. Thunderstorms
can cause the device to malfunction and increase the risk of
electric shock.

Service and Support

lf your device is not performing as it should, please take it to
your local service providers or dealer for service.
12

Advertisement

loading