Do you have a question about the 255 and is the answer not in the manual?
Questions and answers
Steve Sauer
March 10, 2025
How do I turn on the Proportional mode for a CH250? I have 750 gallon Spa so minute additions of bleach or acid can have large effects.
The manual just says it is available but nothing about activating or using it (proportional control)
1 comments:
Mr. Anderson
March 10, 2025
To activate Proportional mode on a Chemtrol CH250, follow these steps:
1. Turn on the controller. 2. Ensure the displays show the necessary information, including sensor readings. 3. Press [ORP] or [PPM] until the feed control light is set to AUTO. 4. Press [pH] until the feed control light is set to AUTO.
Proportional control will then adjust the feed rate progressively as it approaches the setpoint, helping to prevent overfeeding.
Need help?
Do you have a question about the 255 and is the answer not in the manual?
Questions and answers
How do I turn on the Proportional mode for a CH250? I have 750 gallon Spa so minute additions of bleach or acid can have large effects. The manual just says it is available but nothing about activating or using it (proportional control)
To activate Proportional mode on a Chemtrol CH250, follow these steps:
1. Turn on the controller.
2. Ensure the displays show the necessary information, including sensor readings.
3. Press [ORP] or [PPM] until the feed control light is set to AUTO.
4. Press [pH] until the feed control light is set to AUTO.
Proportional control will then adjust the feed rate progressively as it approaches the setpoint, helping to prevent overfeeding.
This answer is automatically generated