SWAGBOARD NG-1 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Table of Contents

Need help?

Do you have a question about the NG-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for SWAGBOARD NG-1

Page 3 Thank you for your purchase of the SWAGBOARD NG-1 Electric Scooter by SWAGBOARD You’re about to take the next step in the evolution of transportation. The SWAGBOARD takes the fun of a skateboard with electric motor and Li-on Fe Battery, and tops it off with an extra bit of swag.
Page 4 Section 4 - Battery ——14 1.2 - Swagboard Overview ——5 4.1 - Battery Specification ——14 1.3 - Swagboard Specifications ——6 4.2 - Charging the Swagboard ——14 Section 2 – Remote Control ——7 Section 5 - Safety Notice ——15 2.1 - Basic Functions ——8 5.1 - Safe Riding Techniques ——16...
Page 5: Section 1 - Overview
WARNING - Risk of Fire - No User Serviceable Parts 1.1 – What’s in the Box + SWAGBOARD NG-1 Electric + Remote Control + Wrist Strap + User Manual 1.2 – Swagboard Overview SWAGBOARD NG-1 NewGen Electric Skateboard...
Page 6 9.5 lbs. / 4.3 kg Deck 7-ply Canadian Maple Passive Wheels PU (Polyurethane) Motorized Wheel Rubber, 24V Parts Battery 24V Lithium Iron Phosph.ate Charger FY-2942000 fabricado por SHENZHEN FUYUANDIAN ENERGÍA CO., LTD(E350715) Entrada:100-240V CA, 50/60Hz, Salida:29.4Vdc,2A SWAGBOARD NG-1 NewGen Electric Skateboard...
Page 7: Section 2 - Remote Control
Section 2 – Remote Control SWAGBOARD NG-1 NewGen Electric Skateboard...
Page 8 2.1 – Basic Functions The Power Switch Throttle Slide the Power Switch down to turn the remote on. Push the Throttle up to move forward and/or accelerate. Push it down to brake and/or decelerate. SWAGBOARD NG-1 NewGen Electric Skateboard...
Page 9: Connection Indicator
RED and remain will turn WHITE before connecting and turn off on. When the feature is off, the light will turn off. once the Swagboard and remote are successfully connected. If the connection fails, the light will flash as connecting restarts.
Page 10 When the battery level is low, the light will flash. level is low, the light will flash. WARNING: Continue to the next section to learn more in-depth information about the Swagboard’s functions etc. WARNING SWAGBOARD NG-1 NewGen Electric Skateboard...
Page 11: Section 3 - Usage And Instructions
Section 3 – Usage and Instructions Ensure the Swagboard is fully or suitably charged and place it down so that the Control Box is facing the ground before using the remote or skateboard. 3.1 – Connecting Remote Connection The white LED indicator will be oﬀ...
Page 12 Throttle i.e. pushing it slightly up will cause the pushing it slightly down will cause the skateboard skateboard to accelerate slower compared to to decelerate slower compared to pushing it farther pushing it farther up. down. SWAGBOARD NG-1 NewGen Electric Skateboard...
Page 13 Cruise Control. Swagboard will continue to move. To deactivate Cruise Control: + Step 1.Push the Throttle down. This Swagboard may be set to continue moving at its current speed with no need to hold down any buttons or switches. WARNING:...
Page 14: Section 4 - Battery
Storage Humidity 65±20%RH 4.2 – Charging the Swagboard WARNING: Before charging the Swagboard and/or its remote, you MUST turn off both devices and be sure to observe the following instructions. 1.Plug the charger into a grounded wall outlet (100V-240V; 50-60Hz). WARNING 2.DO NOT attempt to operate or use the Swagboard and/or its remote while either is charging.
Page 15: Section 5 - Safety Notice
6.DO NOT charge the battery if there’s excessive odor or heat and any leakage or physical damage. When the Remote or Battery Indicator lights are flashing, the battery level is low and the Swagboard and/or remote need to be charged. When these Indicator lights remain steady, the batteries are fully or sufficiently charged.
Page 16 By riding the Swagboard, the user acknowledges and accepts personal responsibility of all risks associated with the use of the Swagboard, which may include, but are not limited to, muscle injuries, broken bones, lacerations, or other serious injuries that may be sustained while using the Swagboard.
Page 17 + Never carry heavy items while riding. + Never ride in the rain, dark, or dimly lit areas. + Never use the Swagboard to do anything that may cause personal injury or property damage. + Never step off the Swagboard when it is in motion.
Page 18 SWAGBOARD NG-1 NewGen Electric Skateboard...
Page 19: Section 6 - Important Information
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio SWAGBOARD NG-1 NewGen Electric Skateboard...
Page 20 The substances contained inside the battery present chemical risks to the environment. The recommended disposal for any Swagboard at its end-of-life is to dispose of the entire unit at or through an e-Waste recycling center, program, or facility. Local regulations and laws pertaining to the recycling and disposal of lithium ion batteries and/or products containing them will vary according to country, state, and local governments.
Page 21 If a hardware defect arises and a valid claim is received within the warranty period, at its option and to the extent permitted by law, Swagboard will: (1) repair the hardware defect by using new or refurbished parts that are equivalent to new in performance and reliability;...
Page 22: Limitation Of Liability
WARRANTIES THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THE EXPRESS WARRANTY AND TO THE REPAIR OR EPLACEMENT SERVICE AS DETERMINED BY SWAGBOARD IN ITS SOLE DISCRETION. NO RESELLER, AGENT, OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION, EXTENSION, OR ADDITION TO THIS WARRANTY.
Page 23 This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.