C-Pen Reader Pen Quick Start Manual page 4

headphones are connected.
7. Mic: Used to record voice memo.
8. Menu button: Press this button to display context menu
(like mouse right click on PC) settings when available.
9. Scanning window: Frames the text to be scanned.
10. Headphone jack: A standard 3.5 mm headphone jack.
Speaker is muted when headphones are connected.
11. Micro USB connector: Used for charging. To charge,
connect to USB charger or computer USB port.
12. Reset button: Pressing this button resets the device. It is
recommended to use this button only when the device
cannot be turned off properly.
G
ET STARTED
P
OWER ON
Make sure the product is charged. Press the On/Off
button for three seconds to power on ReaderPen (boot
sequence takes about 10 seconds).
L /R
EFT IGHT
Select whether to use the product with left or right hand.
Enter Settings\Left/Right-Handed to select. Press OK to
H
AND
4