Additional Options; Case Layout - Castle group KA018 Operating Manual

A O
DDITIONAL PTIONS
dBDataPRO Software & KA018 PC Link Cable
This cable plugs into the socket labelled 'I/O' on the KA018 case allowing
you to upload saved data to your PC using the required software
'dBDataPRO'. This allows you to easily view log information either graphically
or as text, save the data in your preferred format and also print on your PC
printer.
KA018 AC Output Cable
This cable plugs into the socket labelled 'I/O' on the KA018 case allowing
you to measure the AC signal level on test equipment.
See 'Spare Parts & Accessory Codes' on page 20 for order code details.
T S
ROUBLE HOOTING
Not Printing
Ensure the printer is ONLINE indicated by a solid GREEN LED on the top face
of the printer. The solid RED LED indicates the printer is OFFLINE. Press
the ONLINE / OFFLINE key to toggle between ONLINE or OFFLINE.
Ensure the Printer Power Switch is in the ON position. This is a slide switch
located on the left side of the printer.
ALL
ALL
18
C L
ASE AYOUT
Lower Section
The batteries sit in the foam cut outs as shown below, cut outs are also
provided to hold the battery connections and internal wiring.
12V Battery
Foam
Cut-outs to hold wiring
Upper Section
The instruments and control box are situated in the upper section as indicated
below.
Pro-DX Sound Level Meter
Printer
A
LL
12V Battery
3