Features and Benefits Fully compliant with ExpressCard Specification 1.0 ExpressCard/34 Form Factor Module Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab 10/100M data rate auto-negotiation LEDs indicate the status of data transmission Support Wake On Lan (WOL) power management (optional) ...
Hardware Description LED Indicators The following table provides descriptions of the LED status and their meaning. Color Status Description The port is connecting with 100 Mbps GREEN (100/ACT) BLINK Sending/Receiving Packets The port is connecting with 10 Mbps GREEN (10/ACT) BLINK Sending/Receiving Packets MN5000000041 ...
Hardware Installation General instructions for installing the card are provided below. Since the design of system may vary, refer to your system’s reference manual for further information, if needed. Insert the 10/100 Mbps Ethernet ExpressCard into the ExpressCard slot of your system. Make sure it is inserted all the way in for a solid connection.
Page 5
ExpressCard into your CD-ROM Drive. At the Windows desktop click Start, then Run. Type D:\ExpressCard\RTL81XXX\Vista\setup.exe, then click OK. (Change D:\ to match your CD-ROM drive letter) Follow the on-screen instructions to complete the instructions to complete the installation to complete the installation. For Windows®...
Need help?
Do you have a question about the C-330 and is the answer not in the manual?
Questions and answers